Governing factors for motor oil removal from water with different sorption materials
Само за регистроване кориснике
2008
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
This paper has been focused on the sorbent efficiency for motor oil removal from water. Two types of sorbents were investigated: organic and inorganic. Natural wool fibers (NWFs) and recycled-wool-based nonwoven material (RWNM)) were tested as organic type of sorbents. Sepiolite, bentonite and zeolite have been chosen as representative inorganic sorbents. Sorption was carried out in batch sorption system. Efficiency of oil removal was determined by measuring the oil concentration before and after the sorption process. Extractive-gravimetric method and refractive index determination have been applied as analytical methods for determination of oil concentration in water. Governing factors for sorbent efficiency were proposed, analysed and compared. It was concluded that sorption process is mostly affected by mass of sorbent, sorption time, temperature and pH value of water. NWFs, which were the most efficient sorbent showed maximal efficiency and maximal sorption capacity: 0.1 g of NWFs ...after 10 min at 20 °C and pH 8.00 sorbed 3.3 g of motor oil from 300 mL of water polluted with 4.5 g of motor oil. Maximal efficiency for all sorbents investigated was reached after 30 min of sorption processes, it was 95.0% for NWF, 43.0% for NRWM, 20.7% for sepiolite, 19.6% for bentonite and 21.2% for zeolite. Physical adsorption onto all sorbents is a favorable process (sorption efficiency decrease with increasing temperature) while sorption onto bentonite and zeolite is a result of both physical adsorption and chemisorption (sorption efficiency increase with increasing temperature, up to 80 °C).
Кључне речи:
Motor oil / Sorption / WastewaterИзвор:
Journal of Hazardous Materials, 2008, 154, 1-3, 558-563Издавач:
- Elsevier B.V.
Финансирање / пројекти:
- Financial supports from the Research Fund of Serbia, University of Belgrade, Institute of Transportation from Belgrade.
DOI: 10.1016/j.jhazmat.2007.10.066
ISSN: 0304-3894
WoS: 000256111200074
Scopus: 2-s2.0-42649116471
Институција/група
Tehnološko-metalurški fakultetTY - JOUR AU - Rajaković-Ognjanović, V. AU - Aleksić, G. AU - Rajaković, Lj. PY - 2008 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5548 AB - This paper has been focused on the sorbent efficiency for motor oil removal from water. Two types of sorbents were investigated: organic and inorganic. Natural wool fibers (NWFs) and recycled-wool-based nonwoven material (RWNM)) were tested as organic type of sorbents. Sepiolite, bentonite and zeolite have been chosen as representative inorganic sorbents. Sorption was carried out in batch sorption system. Efficiency of oil removal was determined by measuring the oil concentration before and after the sorption process. Extractive-gravimetric method and refractive index determination have been applied as analytical methods for determination of oil concentration in water. Governing factors for sorbent efficiency were proposed, analysed and compared. It was concluded that sorption process is mostly affected by mass of sorbent, sorption time, temperature and pH value of water. NWFs, which were the most efficient sorbent showed maximal efficiency and maximal sorption capacity: 0.1 g of NWFs after 10 min at 20 °C and pH 8.00 sorbed 3.3 g of motor oil from 300 mL of water polluted with 4.5 g of motor oil. Maximal efficiency for all sorbents investigated was reached after 30 min of sorption processes, it was 95.0% for NWF, 43.0% for NRWM, 20.7% for sepiolite, 19.6% for bentonite and 21.2% for zeolite. Physical adsorption onto all sorbents is a favorable process (sorption efficiency decrease with increasing temperature) while sorption onto bentonite and zeolite is a result of both physical adsorption and chemisorption (sorption efficiency increase with increasing temperature, up to 80 °C). PB - Elsevier B.V. T2 - Journal of Hazardous Materials T1 - Governing factors for motor oil removal from water with different sorption materials EP - 563 IS - 1-3 SP - 558 VL - 154 DO - 10.1016/j.jhazmat.2007.10.066 ER -
@article{ author = "Rajaković-Ognjanović, V. and Aleksić, G. and Rajaković, Lj.", year = "2008", abstract = "This paper has been focused on the sorbent efficiency for motor oil removal from water. Two types of sorbents were investigated: organic and inorganic. Natural wool fibers (NWFs) and recycled-wool-based nonwoven material (RWNM)) were tested as organic type of sorbents. Sepiolite, bentonite and zeolite have been chosen as representative inorganic sorbents. Sorption was carried out in batch sorption system. Efficiency of oil removal was determined by measuring the oil concentration before and after the sorption process. Extractive-gravimetric method and refractive index determination have been applied as analytical methods for determination of oil concentration in water. Governing factors for sorbent efficiency were proposed, analysed and compared. It was concluded that sorption process is mostly affected by mass of sorbent, sorption time, temperature and pH value of water. NWFs, which were the most efficient sorbent showed maximal efficiency and maximal sorption capacity: 0.1 g of NWFs after 10 min at 20 °C and pH 8.00 sorbed 3.3 g of motor oil from 300 mL of water polluted with 4.5 g of motor oil. Maximal efficiency for all sorbents investigated was reached after 30 min of sorption processes, it was 95.0% for NWF, 43.0% for NRWM, 20.7% for sepiolite, 19.6% for bentonite and 21.2% for zeolite. Physical adsorption onto all sorbents is a favorable process (sorption efficiency decrease with increasing temperature) while sorption onto bentonite and zeolite is a result of both physical adsorption and chemisorption (sorption efficiency increase with increasing temperature, up to 80 °C).", publisher = "Elsevier B.V.", journal = "Journal of Hazardous Materials", title = "Governing factors for motor oil removal from water with different sorption materials", pages = "563-558", number = "1-3", volume = "154", doi = "10.1016/j.jhazmat.2007.10.066" }
Rajaković-Ognjanović, V., Aleksić, G.,& Rajaković, Lj.. (2008). Governing factors for motor oil removal from water with different sorption materials. in Journal of Hazardous Materials Elsevier B.V.., 154(1-3), 558-563. https://doi.org/10.1016/j.jhazmat.2007.10.066
Rajaković-Ognjanović V, Aleksić G, Rajaković L. Governing factors for motor oil removal from water with different sorption materials. in Journal of Hazardous Materials. 2008;154(1-3):558-563. doi:10.1016/j.jhazmat.2007.10.066 .
Rajaković-Ognjanović, V., Aleksić, G., Rajaković, Lj., "Governing factors for motor oil removal from water with different sorption materials" in Journal of Hazardous Materials, 154, no. 1-3 (2008):558-563, https://doi.org/10.1016/j.jhazmat.2007.10.066 . .