Effects of Multiple Defects on Welded Joint Behaviour under the Uniaxial Tensile Loading: Fem and Experimental Approach
Autori
Aranđelović, MihajloPetrović, Ana
Đorđević, Branislav
Sedmak, Simon
Sedmak, Aleksandar
Dikić, Stefan
Radu, Dorin
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
The research represents the ongoing investigation of the welded joints behavior made of low-carbon low-alloyed steel in the presence of different multiple defects. Following the initial experimental and numerical analyses performed on low-grade steel, a set of experiments were performed with specimens made of steel EN 1.0044 (commercial designation S275JR), along with development of new numerical models. Four combinations were made, including defects like undercuts, excess weld metal, misalignment, weld face sagging and incomplete root penetration, considering that these defects are often encountered in practice, and can appear simultaneously. The finite element method (FEM) was used to simulate the experiments. Tensile properties of the HAZ and weld metal were calculated using strain measurements by the digital image correlation (DIC) method. The finite element method (FEM) results were in good agreement with the experimental ones.
Ključne reči:
digital image correlation / FEM analysis / heat affected zone / low-carbon alloyed steel / welded joint defectsIzvor:
Sustainability, 2023, 15, 1, 761-Izdavač:
- MDPI
Finansiranje / projekti:
- Ministarstvo nauke, tehnološkog razvoja i inovacija Republike Srbije, institucionalno finansiranje - 200135 (Univerzitet u Beogradu, Tehnološko-metalurški fakultet) (RS-MESTD-inst-2020-200135)
- Ministarstvo nauke, tehnološkog razvoja i inovacija Republike Srbije, institucionalno finansiranje - 200105 (Univerzitet u Beogradu, Mašinski fakultet) (RS-MESTD-inst-2020-200105)
- Ministarstvo nauke, tehnološkog razvoja i inovacija Republike Srbije, institucionalno finansiranje - 200213 (Inovacioni centar Mašinskog fakulteta u Beogradu doo) (RS-MESTD-inst-2020-200213)
Institucija/grupa
Tehnološko-metalurški fakultetTY - JOUR AU - Aranđelović, Mihajlo AU - Petrović, Ana AU - Đorđević, Branislav AU - Sedmak, Simon AU - Sedmak, Aleksandar AU - Dikić, Stefan AU - Radu, Dorin PY - 2023 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5601 AB - The research represents the ongoing investigation of the welded joints behavior made of low-carbon low-alloyed steel in the presence of different multiple defects. Following the initial experimental and numerical analyses performed on low-grade steel, a set of experiments were performed with specimens made of steel EN 1.0044 (commercial designation S275JR), along with development of new numerical models. Four combinations were made, including defects like undercuts, excess weld metal, misalignment, weld face sagging and incomplete root penetration, considering that these defects are often encountered in practice, and can appear simultaneously. The finite element method (FEM) was used to simulate the experiments. Tensile properties of the HAZ and weld metal were calculated using strain measurements by the digital image correlation (DIC) method. The finite element method (FEM) results were in good agreement with the experimental ones. PB - MDPI T2 - Sustainability T1 - Effects of Multiple Defects on Welded Joint Behaviour under the Uniaxial Tensile Loading: Fem and Experimental Approach IS - 1 SP - 761 VL - 15 DO - 10.3390/su15010761 ER -
@article{ author = "Aranđelović, Mihajlo and Petrović, Ana and Đorđević, Branislav and Sedmak, Simon and Sedmak, Aleksandar and Dikić, Stefan and Radu, Dorin", year = "2023", abstract = "The research represents the ongoing investigation of the welded joints behavior made of low-carbon low-alloyed steel in the presence of different multiple defects. Following the initial experimental and numerical analyses performed on low-grade steel, a set of experiments were performed with specimens made of steel EN 1.0044 (commercial designation S275JR), along with development of new numerical models. Four combinations were made, including defects like undercuts, excess weld metal, misalignment, weld face sagging and incomplete root penetration, considering that these defects are often encountered in practice, and can appear simultaneously. The finite element method (FEM) was used to simulate the experiments. Tensile properties of the HAZ and weld metal were calculated using strain measurements by the digital image correlation (DIC) method. The finite element method (FEM) results were in good agreement with the experimental ones.", publisher = "MDPI", journal = "Sustainability", title = "Effects of Multiple Defects on Welded Joint Behaviour under the Uniaxial Tensile Loading: Fem and Experimental Approach", number = "1", pages = "761", volume = "15", doi = "10.3390/su15010761" }
Aranđelović, M., Petrović, A., Đorđević, B., Sedmak, S., Sedmak, A., Dikić, S.,& Radu, D.. (2023). Effects of Multiple Defects on Welded Joint Behaviour under the Uniaxial Tensile Loading: Fem and Experimental Approach. in Sustainability MDPI., 15(1), 761. https://doi.org/10.3390/su15010761
Aranđelović M, Petrović A, Đorđević B, Sedmak S, Sedmak A, Dikić S, Radu D. Effects of Multiple Defects on Welded Joint Behaviour under the Uniaxial Tensile Loading: Fem and Experimental Approach. in Sustainability. 2023;15(1):761. doi:10.3390/su15010761 .
Aranđelović, Mihajlo, Petrović, Ana, Đorđević, Branislav, Sedmak, Simon, Sedmak, Aleksandar, Dikić, Stefan, Radu, Dorin, "Effects of Multiple Defects on Welded Joint Behaviour under the Uniaxial Tensile Loading: Fem and Experimental Approach" in Sustainability, 15, no. 1 (2023):761, https://doi.org/10.3390/su15010761 . .