Designing of manufacturing process of reformer integrated in system with HTPEM fuel cell stack
Аутори
Milošević, MilošMladenović, Goran
Sedmak, Aleksandar
Rakin, Marko
Likozar, Blaž
Ivanović, Ivana
Živanović, Saša
Конференцијски прилог (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
In this paper is shown designing of manufacturing process of reformer in polymeric electrolyte membrane
(PEM) fuel cell. The process is based on reformer modelling, analyzing of reforming initial geometry and
change of geometry. In addition to the numerical calculation, change of geometry is based on tool path
simulation analysis in order to obtain more efficient reformer production. Before machining, tool path
simulation was performed and generated by PTC Creo/Parametric software. The recommendations for
geometry changing are given in order to decrease of machining costs, and are made so that did not affect
the initial reformer performances. The reformer machining is carried out on a CNC milling machine and Wire
EDM machine.
Кључне речи:
Reformer / design / CNC millingИзвор:
International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH, 2017, 51-Издавач:
- Belgrade : Faculty of Mechanical Engineering, Innovation Center
Финансирање / пројекти:
- Развој савремених метода дијагностике и испитивања машинских структура (RS-MESTD-Technological Development (TD or TR)-35040)
Институција/група
Tehnološko-metalurški fakultetTY - CONF AU - Milošević, Miloš AU - Mladenović, Goran AU - Sedmak, Aleksandar AU - Rakin, Marko AU - Likozar, Blaž AU - Ivanović, Ivana AU - Živanović, Saša PY - 2017 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6341 AB - In this paper is shown designing of manufacturing process of reformer in polymeric electrolyte membrane (PEM) fuel cell. The process is based on reformer modelling, analyzing of reforming initial geometry and change of geometry. In addition to the numerical calculation, change of geometry is based on tool path simulation analysis in order to obtain more efficient reformer production. Before machining, tool path simulation was performed and generated by PTC Creo/Parametric software. The recommendations for geometry changing are given in order to decrease of machining costs, and are made so that did not affect the initial reformer performances. The reformer machining is carried out on a CNC milling machine and Wire EDM machine. PB - Belgrade : Faculty of Mechanical Engineering, Innovation Center C3 - International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH T1 - Designing of manufacturing process of reformer integrated in system with HTPEM fuel cell stack SP - 51 UR - https://hdl.handle.net/21.15107/rcub_technorep_6341 ER -
@conference{ author = "Milošević, Miloš and Mladenović, Goran and Sedmak, Aleksandar and Rakin, Marko and Likozar, Blaž and Ivanović, Ivana and Živanović, Saša", year = "2017", abstract = "In this paper is shown designing of manufacturing process of reformer in polymeric electrolyte membrane (PEM) fuel cell. The process is based on reformer modelling, analyzing of reforming initial geometry and change of geometry. In addition to the numerical calculation, change of geometry is based on tool path simulation analysis in order to obtain more efficient reformer production. Before machining, tool path simulation was performed and generated by PTC Creo/Parametric software. The recommendations for geometry changing are given in order to decrease of machining costs, and are made so that did not affect the initial reformer performances. The reformer machining is carried out on a CNC milling machine and Wire EDM machine.", publisher = "Belgrade : Faculty of Mechanical Engineering, Innovation Center", journal = "International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH", title = "Designing of manufacturing process of reformer integrated in system with HTPEM fuel cell stack", pages = "51", url = "https://hdl.handle.net/21.15107/rcub_technorep_6341" }
Milošević, M., Mladenović, G., Sedmak, A., Rakin, M., Likozar, B., Ivanović, I.,& Živanović, S.. (2017). Designing of manufacturing process of reformer integrated in system with HTPEM fuel cell stack. in International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH Belgrade : Faculty of Mechanical Engineering, Innovation Center., 51. https://hdl.handle.net/21.15107/rcub_technorep_6341
Milošević M, Mladenović G, Sedmak A, Rakin M, Likozar B, Ivanović I, Živanović S. Designing of manufacturing process of reformer integrated in system with HTPEM fuel cell stack. in International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH. 2017;:51. https://hdl.handle.net/21.15107/rcub_technorep_6341 .
Milošević, Miloš, Mladenović, Goran, Sedmak, Aleksandar, Rakin, Marko, Likozar, Blaž, Ivanović, Ivana, Živanović, Saša, "Designing of manufacturing process of reformer integrated in system with HTPEM fuel cell stack" in International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH (2017):51, https://hdl.handle.net/21.15107/rcub_technorep_6341 .