Implementation of the electrohydrodynamics' perfect dielectric model in OpenFOAM®
Аутори
Bošković, Stefan A.Karač, Aleksandar
Vrhovac, Slobodan B.
Aleksandar, Belić
Bugarski, Branko
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
The electrohydrodynamics' (EHD) perfect dielectric model was added into computational fluid dynamics (CFD) software OpenFOAM® in order to improve its usability for the EHD field and specifically for the mentioned model. Based on the investigated literature, it can be said that this is the most complete implementation of the said model. Two sets of numerical simulations with two different fluids are presented and analyzed. One set is one-dimensional. The other set is with a drop of one fluid surrounded by other fluid. Oscillations can be observed with certain expressions or calculation strategies for the electrostrictive force, and used for disregarding them. Results that are closer to analytical predictions can be obtained by using appropriate expression for the dielectric force. The electrostrictive force was implemented not only for nonpolar, but also for polar fluids, and it is shown that it might significantly influence the drop deformation. Calculated and analytically predicted dr...op deformations were close or comparable even up to around 0.25, what is significantly higher and different from a previous study made by other authors. Different expressions for the electric permittivity and usage of limiters for volume fractions were investigated. Conclusions from this paper can be transferred to more complicated models.
Кључне речи:
electrohydrodynamics / EHD / CFD / OpenFOAM® / perfect dielectric model / electrostrictive forceИзвор:
Journal of Engineering & Processing Management, 2022, 14, 2, 66-75Издавач:
- University of East Sarajevo, Faculty of Technology Zvornik
Финансирање / пројекти:
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200287 (Иновациони центар Технолошко-металуршког факултета у Београду доо) (RS-MESTD-inst-2020-200287)
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200135 (Универзитет у Београду, Технолошко-металуршки факултет) (RS-MESTD-inst-2020-200135)
- MultiPromis - Multifunctional leaf protein and assembled nanocarrier structures delivered by enzyme technology (RS-ScienceFundRS-Ideje-7751519)
Колекције
Институција/група
Inovacioni centarTY - JOUR AU - Bošković, Stefan A. AU - Karač, Aleksandar AU - Vrhovac, Slobodan B. AU - Aleksandar, Belić AU - Bugarski, Branko PY - 2022 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6619 AB - The electrohydrodynamics' (EHD) perfect dielectric model was added into computational fluid dynamics (CFD) software OpenFOAM® in order to improve its usability for the EHD field and specifically for the mentioned model. Based on the investigated literature, it can be said that this is the most complete implementation of the said model. Two sets of numerical simulations with two different fluids are presented and analyzed. One set is one-dimensional. The other set is with a drop of one fluid surrounded by other fluid. Oscillations can be observed with certain expressions or calculation strategies for the electrostrictive force, and used for disregarding them. Results that are closer to analytical predictions can be obtained by using appropriate expression for the dielectric force. The electrostrictive force was implemented not only for nonpolar, but also for polar fluids, and it is shown that it might significantly influence the drop deformation. Calculated and analytically predicted drop deformations were close or comparable even up to around 0.25, what is significantly higher and different from a previous study made by other authors. Different expressions for the electric permittivity and usage of limiters for volume fractions were investigated. Conclusions from this paper can be transferred to more complicated models. PB - University of East Sarajevo, Faculty of Technology Zvornik T2 - Journal of Engineering & Processing Management T1 - Implementation of the electrohydrodynamics' perfect dielectric model in OpenFOAM® EP - 75 IS - 2 SP - 66 VL - 14 DO - 10.7251/JEPM2202066B ER -
@article{ author = "Bošković, Stefan A. and Karač, Aleksandar and Vrhovac, Slobodan B. and Aleksandar, Belić and Bugarski, Branko", year = "2022", abstract = "The electrohydrodynamics' (EHD) perfect dielectric model was added into computational fluid dynamics (CFD) software OpenFOAM® in order to improve its usability for the EHD field and specifically for the mentioned model. Based on the investigated literature, it can be said that this is the most complete implementation of the said model. Two sets of numerical simulations with two different fluids are presented and analyzed. One set is one-dimensional. The other set is with a drop of one fluid surrounded by other fluid. Oscillations can be observed with certain expressions or calculation strategies for the electrostrictive force, and used for disregarding them. Results that are closer to analytical predictions can be obtained by using appropriate expression for the dielectric force. The electrostrictive force was implemented not only for nonpolar, but also for polar fluids, and it is shown that it might significantly influence the drop deformation. Calculated and analytically predicted drop deformations were close or comparable even up to around 0.25, what is significantly higher and different from a previous study made by other authors. Different expressions for the electric permittivity and usage of limiters for volume fractions were investigated. Conclusions from this paper can be transferred to more complicated models.", publisher = "University of East Sarajevo, Faculty of Technology Zvornik", journal = "Journal of Engineering & Processing Management", title = "Implementation of the electrohydrodynamics' perfect dielectric model in OpenFOAM®", pages = "75-66", number = "2", volume = "14", doi = "10.7251/JEPM2202066B" }
Bošković, S. A., Karač, A., Vrhovac, S. B., Aleksandar, B.,& Bugarski, B.. (2022). Implementation of the electrohydrodynamics' perfect dielectric model in OpenFOAM®. in Journal of Engineering & Processing Management University of East Sarajevo, Faculty of Technology Zvornik., 14(2), 66-75. https://doi.org/10.7251/JEPM2202066B
Bošković SA, Karač A, Vrhovac SB, Aleksandar B, Bugarski B. Implementation of the electrohydrodynamics' perfect dielectric model in OpenFOAM®. in Journal of Engineering & Processing Management. 2022;14(2):66-75. doi:10.7251/JEPM2202066B .
Bošković, Stefan A., Karač, Aleksandar, Vrhovac, Slobodan B., Aleksandar, Belić, Bugarski, Branko, "Implementation of the electrohydrodynamics' perfect dielectric model in OpenFOAM®" in Journal of Engineering & Processing Management, 14, no. 2 (2022):66-75, https://doi.org/10.7251/JEPM2202066B . .