The influence of DBD plasma treatment on the dielectric loss tangent and surface morphology of fibrous polymeric materials
Аутори
Ivanovska, Aleksandra M.Kostić, Mirjana M.
Maletić, Slavica B.
Žekić, Andrijana A.
Asanović, Koviljka A.
Cerović, Dragana D.
Конференцијски прилог (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
The aim of this work was to investigate the influence of dielectric barrier discharge (DBD) plasma
treatment during 30 and 60 seconds on the fibrous polymeric materials made of cotton, polyethylene terephthalate and polypropylene by recording the frequency dependence of the dielectric loss tangent. Furthermore, the changes in the sample surface morphology were observed using scanning electron microscopy (SEM). By comparing the frequency dependence of the dielectric loss tangent, the same trend with increasing the frequency was noticed for both untreated and treated samples, after 0.5 h as well as 2 and 7 days after plasma treatment. The changes in the value of dielectric loss tangent are small, but it can be noticed that the plasma effect on the cotton sample was maintained after 7 days, which is less noticeable for the samples made of polyethylene terephthalate and polypropylene. The SEM analysis of the cotton sample
showed micro cracks on its surface as a result of plasma etching, ...while the polyethylene terephthalate fibers appeared darker and rough after the plasma treatment. The changes were more obvious on the samples treated 60 seconds compared to samples treated 30 seconds. There are no significant changes in the polypropylene sample surface morphology.
Извор:
Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VIII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 23-25. September 2019, 2019, 56-57Издавач:
- Belgrade : Serbian Ceramic Society
Финансирање / пројекти:
- Функционализација, карактеризација и примена целулозе и деривата целулозе (RS-MESTD-Basic Research (BR or ON)-172029)
- Проучавање утицаја третирања на диелектричне, оптичке, магнетне и особине површина кристалних и полимерних система (RS-MESTD-Basic Research (BR or ON)-171029)
Колекције
Институција/група
Inovacioni centarTY - CONF AU - Ivanovska, Aleksandra M. AU - Kostić, Mirjana M. AU - Maletić, Slavica B. AU - Žekić, Andrijana A. AU - Asanović, Koviljka A. AU - Cerović, Dragana D. PY - 2019 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6814 AB - The aim of this work was to investigate the influence of dielectric barrier discharge (DBD) plasma treatment during 30 and 60 seconds on the fibrous polymeric materials made of cotton, polyethylene terephthalate and polypropylene by recording the frequency dependence of the dielectric loss tangent. Furthermore, the changes in the sample surface morphology were observed using scanning electron microscopy (SEM). By comparing the frequency dependence of the dielectric loss tangent, the same trend with increasing the frequency was noticed for both untreated and treated samples, after 0.5 h as well as 2 and 7 days after plasma treatment. The changes in the value of dielectric loss tangent are small, but it can be noticed that the plasma effect on the cotton sample was maintained after 7 days, which is less noticeable for the samples made of polyethylene terephthalate and polypropylene. The SEM analysis of the cotton sample showed micro cracks on its surface as a result of plasma etching, while the polyethylene terephthalate fibers appeared darker and rough after the plasma treatment. The changes were more obvious on the samples treated 60 seconds compared to samples treated 30 seconds. There are no significant changes in the polypropylene sample surface morphology. PB - Belgrade : Serbian Ceramic Society C3 - Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VIII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 23-25. September 2019 T1 - The influence of DBD plasma treatment on the dielectric loss tangent and surface morphology of fibrous polymeric materials EP - 57 SP - 56 UR - https://hdl.handle.net/21.15107/rcub_technorep_6814 ER -
@conference{ author = "Ivanovska, Aleksandra M. and Kostić, Mirjana M. and Maletić, Slavica B. and Žekić, Andrijana A. and Asanović, Koviljka A. and Cerović, Dragana D.", year = "2019", abstract = "The aim of this work was to investigate the influence of dielectric barrier discharge (DBD) plasma treatment during 30 and 60 seconds on the fibrous polymeric materials made of cotton, polyethylene terephthalate and polypropylene by recording the frequency dependence of the dielectric loss tangent. Furthermore, the changes in the sample surface morphology were observed using scanning electron microscopy (SEM). By comparing the frequency dependence of the dielectric loss tangent, the same trend with increasing the frequency was noticed for both untreated and treated samples, after 0.5 h as well as 2 and 7 days after plasma treatment. The changes in the value of dielectric loss tangent are small, but it can be noticed that the plasma effect on the cotton sample was maintained after 7 days, which is less noticeable for the samples made of polyethylene terephthalate and polypropylene. The SEM analysis of the cotton sample showed micro cracks on its surface as a result of plasma etching, while the polyethylene terephthalate fibers appeared darker and rough after the plasma treatment. The changes were more obvious on the samples treated 60 seconds compared to samples treated 30 seconds. There are no significant changes in the polypropylene sample surface morphology.", publisher = "Belgrade : Serbian Ceramic Society", journal = "Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VIII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 23-25. September 2019", title = "The influence of DBD plasma treatment on the dielectric loss tangent and surface morphology of fibrous polymeric materials", pages = "57-56", url = "https://hdl.handle.net/21.15107/rcub_technorep_6814" }
Ivanovska, A. M., Kostić, M. M., Maletić, S. B., Žekić, A. A., Asanović, K. A.,& Cerović, D. D.. (2019). The influence of DBD plasma treatment on the dielectric loss tangent and surface morphology of fibrous polymeric materials. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VIII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 23-25. September 2019 Belgrade : Serbian Ceramic Society., 56-57. https://hdl.handle.net/21.15107/rcub_technorep_6814
Ivanovska AM, Kostić MM, Maletić SB, Žekić AA, Asanović KA, Cerović DD. The influence of DBD plasma treatment on the dielectric loss tangent and surface morphology of fibrous polymeric materials. in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VIII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 23-25. September 2019. 2019;:56-57. https://hdl.handle.net/21.15107/rcub_technorep_6814 .
Ivanovska, Aleksandra M., Kostić, Mirjana M., Maletić, Slavica B., Žekić, Andrijana A., Asanović, Koviljka A., Cerović, Dragana D., "The influence of DBD plasma treatment on the dielectric loss tangent and surface morphology of fibrous polymeric materials" in Program and the Book of abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VIII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 23-25. September 2019 (2019):56-57, https://hdl.handle.net/21.15107/rcub_technorep_6814 .