Претраживање
Приказ резултата 21-30 од 57
Influence of the way of synthesis of poly(methyl methacrylate) in the presence of surface modified TiO2 nanoparticles on the properties of obtained nanocomposites / Uticaj načina sinteze poli(metil metakrilata) u prisustvu površinski modifikovanih TiO2 nanočestica na svojstva dobijenih nanokompozita
(Association of Chemical Engineers of Serbia, 2010)
Incorporation of inorganic nanoparticles can significantly affect the properties of the polymer matrix. The properties of polymer nanocomposites depend on the type of incorporated nanoparticles, their size and shape, their ...
Influence of current and temperature on discharge characteristics of electrochemical nickel-cadmium system / Uticaj struje i temperature na karakteristike pražnjenja elektrohemijskog nikal-kadmijum sistema
(Association of Chemical Engineers of Serbia, 2010)
The paper elaborates determination of characteristic values in the discharging process of non-hermetic nickel-cadmium galvanic battery with nominal voltage Un = 60 V and nominal capacity qn = C5 = 190 A h and its dependence ...
Synthesis, structure and solvatochromic properties of 3-cyano-4,6-diphenyl-5-(3- and 4-substituted phenylazo)-2-pyridones / Sinteza, struktura i solvatohromna svojstva 3-cijano-4,6-difenil-5-(3- i 4-supstituisanih fenilazo)-2-piridona
(Serbian Chemical Society, Belgrade, 2010)
A series of some new pyridone arylazo dyes was synthesized from the corresponding diazonium salts and 3-cyano-4,6-diphenyl-2-pyridone using the classical reaction for the synthesis of the azo compounds. The structures of ...
Nondestructive testing of thermal shock resistance of cordierite/silicon carbide composite materials after cyclic thermal shock
(Taylor & Francis Inc, Philadelphia, 2010)
Two different types cordierite/silicon carbide composite ceramic materials (KS 50 and KZ 50) were used for this investigation. Both materials were exposed to the water quench test from 950 degrees C, applying various numbers ...
Dynamic mechanical properties of nanocomposites with poly (vinyl butyral) matrix
(World Scientific Publ Co Pte Ltd, Singapore, 2010)
This work reports the preparation of SiO(2) and TiO(2)/poly (vinyl butyral) nanocomposites with enhanced dynamic mechanical properties. Silica and titania nanoparticles were introduced in the matrix as the neat powder and ...
Oxidative stabilization of sunflower oil by antioxidant fractions from selected Lamiaceae herbs / Oksidativna stabilizacija suncokretovog ulja sa antioksidativnim frakcijama iz odabranih biljaka familije Lamiaceae
(Association of the Chemical Engineers of Serbia, 2010)
This study reports the effect of antioxidant fractions from rosemary (Rosmarinus officinalis), sage (Salvia officinalis), thyme (Thymus vulgaris) and hyssop (Hyssop officinalis) on the oxidative stability of sunflower oil ...
Biodiesel synthesis using K2CO3/Al-O-Si aerogel catalysts / Sinteza biodizela katalizovana alumosilikatnim aerogelom sa K2Co3
(Serbian Chemical Society, Belgrade, 2010)
In this study, catalysts for fatty acid methyl esters (FAME or biodiesel) synthesis with K2CO3 as the active component on an alumina/silica support were synthesized using the sol-gel method, which was followed by drying ...
Removal of organochlorine pesticides from water using virgin and regenerated granular activated carbon / Uklanjanje pesticida iz vode na granulisanom aktivnom uglju
(Serbian Chemical Society, Belgrade, 2010)
Public water systems use granular activated carbon in order to eliminate pesticides. After saturation, the used activated carbon is regenerated and reused in order to reduce the costs of water production and minimize waste. ...
Drying of immobilized yeast cells in a spouted bed dryer with a moving draft tube / Sušenje imobilisanih ćelija pivskog kvasca u sušioniku sa fontanskim slojem i pokretnom centralnom cevi
(Association of the Chemical Engineers of Serbia, 2010)
Brewery yeast cells immobilized in Ca-alginate were dried in a laboratory scale spouted bed with a draft tube. The experiment was conducted under variable temperatures and air flow rates. The temperature and air velocity ...
The influence of the parameters of lost foam process on the quality of aluminum alloys castings / Uticaj parametara lost foam procesa na kvalitet odlivaka legura aluminijuma
(Association of Chemical Engineers of Serbia, 2010)
This paper presents the research results of application of Lost foam process for aluminum alloys castings of a simple geometry. The process characteristic is that patterns and gating of moulds, made of polymers, stay in ...