Претраживање
Приказ резултата 11-20 од 58
Thermal shock damage characterization of refractory composites
(Elsevier Sci Ltd, Oxford, 2008)
The possibility of using dolomite and bauxite for synthesis of high temperature castable was studied. Behavior of the material in conditions of rapid temperature changes was investigated. Water quench test was applied to ...
Crystallization behavior and sintering of cordierite synthesized by an aqueous sol-gel route
(Elsevier Sci Ltd, Oxford, 2012)
The purpose of the research was to investigate crystallization behavior and sintering of cordierite synthesized by a low-price aqueous sol gel route starting from silicic acid and magnesium and aluminum salts. Viscous ...
Re-formation of metastable epsilon-Fe2O3 in post-annealing of Fe2O3/SiO2 nanostructure: Synthesis, computational particle shape analysis in micrographs and magnetic properties
(Ceramics International, 2017)
Several Fe2O3/SiO2 nanostructures were synthesized by the combination of the microemulsion and a sol-gel methods. Based on X-ray powder diffraction (XRD) and magnetic measurements (giant coercivity similar to 2.13 T) we ...
Carboxylic acids and polyethylene glycol assisted synthesis of nanocrystalline nickel ferrites
(Elsevier Sci Ltd, Oxford, 2013)
Different synthesis methods for the preparation of nanocrystalline nickel ferrites are reported: the thermal decomposition of precursors, made of: (i) metal-nitrate salts with carboxylic acids (citric, malonic and tartaric), ...
Conventional and spark-plasma sintering of cordierite powders synthesized by sol-gel methods
(Elsevier Sci Ltd, Oxford, 2013)
Cordierite powders synthesized by colloidal and alkoxide sol-gel methods were conventionally and spark-plasma sintered. The powders for the sintering investigations were obtained by calcination of the gels at a temperature ...
Physical-mechanical and microstructural properties of alkali-activated fly ash-blast furnace slag blends
(Elsevier Sci Ltd, Oxford, 2015)
This paper investigated physical mechanical and microstructural properties of alkali-activated binders based on blends of fly ash (FA) and blast furnace slag (BFS). FA BFS blends were alkali-activated with sodium silicate ...
Core-shell superparamagnetic iron oxide nanoparticle (SPION) clusters: TEM micrograph analysis, particle design and shape analysis
(Elsevier, 2016)
For the first time, particle shape analysis of silica coated iron oxide (maghemite/magnetite) nanoparticle clusters (core-shell nanostructures) is discussed using computational methods. We analyzed three samples of core-shell ...
Polycrystalline (Y0.7Gd0.3)(2)O-3:Eu3+ ceramics fabricated by Spark Plasma Sintering: Densification and microstructure development
(Elsevier Sci Ltd, Oxford, 2014)
Using Spark Plasma Sintering it is possible to produce polycrystalline ceramics of very fine microstructure and good mechanical properties. This work presents the fabrication of such ceramics using Eu3+-doped (Y0.7Gd0.3)(2)O-3 ...
Preparation of low cost alumina nanofibers via electrospinning of aluminium chloride hydroxide/poly (vinyl alcohol) solution
(Elsevier Sci Ltd, Oxford, 2013)
Alumina nanofibers are very suitable materials for use as reinforcement in a great variety of high performance composite materials. Nanosized alumina fibers were prepared from the aluminum chloride hydroxide/poly (vinyl ...
Mg/Cu co-substituted hydroxyapatite – Biocompatibility, mechanical properties and antimicrobial activity
(Elsevier Ltd, 2019)
The aim of this study was to improve the mechanical properties and to optimize antimicrobial activity of hydroxyapatite (HAP) by simultaneous doping with Mg and Cu ions in order to obtain material that would be able to ...