Pretraživanje
Prikaz rezultata 21-30 od 902
Modeling of the Mechanical Behavior of Fiber-Reinforced Ceramic Composites Using Finite Element Method (FEM)
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2014)
Modeling of the mechanical behavior of fiber-reinforced ceramic matrix composites (CMC) is presented by the example of Al2O3 fibers in an alumina based matrix. The starting point of the modeling is a substructure (elementary ...
The Mechanisms of Cavitation Erosion of Raw and Sintered Basalt
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2019)
The paper analyzes the morphology of cavitation damage of raw and sintered basalt samples. The experiment was conducted using the ultrasonic vibratory cavitation test method according to the ASTM G-32 standard. During the ...
Optical fibers with composite magnetic coating
(Elsevier, 2002)
The goal of these investigations was to define the process parameters that enable the formation of a composite coating with the most uniform thickness on an optical fiber. The composite coating was obtained by drawing the ...
Novel β-galactosidase nanobiocatalyst systems for application in the synthesis of bioactive galactosides
(Royal Society of Chemistry, 2016)
In this study, unmodified, amino modified and cyanuric chloride functionalized amino modified nonporous fumed nano-silica particles (FNS, AFNS and CCAFNS, respectively) were used for the development of efficient nanobiocatalysts ...
Analysis of the properties of a Cu-Al2-O3 sintered system based on ultra fine and nanocomposite powders
(International Institute for the Science of Sintering, Beograd, 2007)
In this paper synthesis of a composite based on Cu-Al2O3 by a thermo-chemical method is shown along with a comparative analysis of the properties of the obtained nanocomposite sintered samples, which are characterized by ...
Influence of an antimicrobial treatment on the strength properties of polyamide/elastane weft-knitted fabric
(Wiley, Hoboken, 2007)
Polyamide/elastane weft-knitted fabric, as a suitable compression material, was treated with gentamicin sulfate and a natural antimicrobial preparation of the autochthonous essential oil of Picea abies. The antimicrobial ...
The Analysis of the Nucleation Process of the Lithium Germanium Phosphate Glass
(Science of Sintering, 2022)
The nucleation process of lithium germanium-phosphate glass was studied to determine the temperature range of nucleation and the temperature of the maximum nucleation rate. The differential thermal analysis (DTA), and ...
Comparison of Mechanical Behavior of SiC Sintered Specimen to Analysis of Surface Defects
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2014)
Silicon carbide is the material that in sintered form is suiTab. for protection from impact as part of the multilayered structure. Its role is to accumulate energy from the projectile, to plastically deform the projectile ...
Structural and crystallization characteristics of K 2 O· TiO 2 ·3GeO 2 glass / Strukturní a krystalizaèní charakteristiky k2o·tio2·3geo2 skel
(Institute of Chemical Technology, 2005)
Structure and crystallization of K 2 O·TiO 2 ·3GeO 2 glass have been investigated by means of Fourier transform infrared spectroscopy (FTIR), differential thermal analysis (DTA), differential scanning calorimetry (DSC), ...
Efficient immobilization of lipase from Candida rugosa by entrapment into poly(N-isopropylacrylamide-co-itaconic acid) hydrogels under mild conditions
(Springer, New York, 2012)
Temperature and pH-sensitive hydrogels, based on N-isopropylacrylamide and itaconic acid, with varying comonomer ratios and crosslinking agent content, were prepared by free radical crosslinking copolymerization. The ...