Search
Now showing items 11-17 of 17
Normal- and reversed-phase chromatography of para-substituted propanoic acid Amides
(Springer Heidelberg, Heidelberg, 2002)
The chromatographic behavior of newly synthesized para-substituted propanoic acid amides has been studied in normal- and reversed-phase thin-layer chromatography. The retention mechanism on different TLC supports was ...
Stress corrosion cracking susceptibility of Al-Mg alloy sheet with high Mg content
(Elsevier Science Sa, Lausanne, 2002)
Slow strain rate testing (SSRT) was used to study the effect of the microstructure on the stress corrosion cracking (SCC) susceptibility of Al-Mg alloy sheet containing 6.8 wt.% Mg. In the cold-rolled and fully annealed ...
Bulk etching rate of LR115 detectors
(Pergamon-Elsevier Science Ltd, Oxford, 2002)
The thickness of the layer of LR115 detector removed during etching was measured with a very precise instrument. Dependence of the bulk etch rate on temperature of the etching solution was investigated. It has been found ...
Hydrogen evolution reaction from EDTA solutions
(4th Conference of the Yugoslav Materials Research Society, 2002)
An attempt was made to investigate the mechanism and kinetics of hydrogen evolution reaction on zinc and platinum wire electrodes from solutions containing ethylene diamine tetraacetic acid (EDTA). EDTA is a tetra-basic ...
Aging of the over-voltage protection elements caused by over-voltages
(Microelectronics Reliability, 2002)
The aim of this work is examining the influence of the number of the activation-over-voltage pulses to the aging of over-voltage protection elements. Both non-linear (gas-filled surge arresters (GFSA), varistors, over-voltage ...
Optical fibers with composite magnetic coating
(Elsevier, 2002)
The goal of these investigations was to define the process parameters that enable the formation of a composite coating with the most uniform thickness on an optical fiber. The composite coating was obtained by drawing the ...
Gas holdup in a gassed reciprocating plate column with Rashig rings placed in interplate spaces
(Canadian Society for Chemical Engineering, 2002)
The gas holdup is studies in a gassed reciprocating plate column with the addition of the Rashig rings placed in each interplate space. The gas holdup generally increases with increasing the vibration speed, the superficial ...