Претраживање
Приказ резултата 31-40 од 42
Synthesis of high-performance alkyd anticorrosion coatings based on waste poly(ethylene terephthalate) / Sinteza visokoefikasnih alkidnih antikorozionih premaza na bazi poli(etilen tereftalata)
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
Synthesis of high-performance anticorrosive coatings obtained from alkyd resins (ARs) based on waste poly(ethylene terephthalate) (PET) glycolyzates is presented. PET glycolyzates, synthesized by catalytic depolymerization ...
The Corrosion Behavior of an Ag43Cu37Zn20 Alloy in the Natural Seawaters
(Japan Inst Metals, Sendai, 2015)
We investigated the effects of natural seawater on the corrosion of an Ag43Cu37Zn20 alloy. The alloy was a commercial brazing filler alloy of composition (BS1845:1984 Ag5) and belongs to the class of Cd-free silver brazing ...
Modified tannins for alkyd based anticorrosive coatings / Primena modifikovanih tanina u antikorozionim alkidnim premazima
(Engineering Society for Corrosion, Belgrade, Serbia, 2019)
The study of the synthesis of anticorrosive inhibitors, based on chemically modified tannins, and their use in alkyd based coatings to improve anticorrosive properties is presented in this work. Two methods of tannin ...
Savremeni čelici - dvojnikovanjem izazvana plastičnost
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, 2014)
A significant increase in the research activity dedicated to high manganese TWIP steels has occurred during the past few years, motivated by the breakthrough combination of strength and ductility possessed by these alloys. ...
Economizer water-wall damages initiated by feedwater impurities
(Savez hemijskih inženjera, Beograd, 2014)
The main causes of efficiency loss in thermal power plants are boiler tube failures that diminish unit reliability and availability, and raise the cost of the electric energy. For that reason, the regular examination of ...
Laser cleaning of textile artifacts with metal threads: Process parameter optimization / Lasersko čišćenje tekstilnih eksponata sa korodiranim metalnim nitima - optimzacije parametara procesa
(Military Technical Institute, Belgrade, 2014)
This paper presents the results of the laser cleaning effects on textile samples with corroded metallic threads. In many museum collections, there are textile exhibits like uniforms, national costumes, flags and home ...
Numerical simulation of fatigue crack growth in Ti-Al6-V4 hip implants under different exploitation conditions
(Elsevier B.V., 2023)
One of the most important aspects of materials typically used in biomedical engineering is their resistance to various unfavourable exploitation conditions, which greatly impact their work life. In terms of extreme conditions, ...
The Influence of Sm Content on the Surface Morphology and Corrosion Behavior of Zn-Co-Sm Composite Coatings
(MDPI, 2023)
The influence of samarium, as an additional alloying element, on the morphology and corrosion performance of the Zn-Co-Sm alloy electrodeposited coatings, was investigated by scanning electron microscopy coupled with energy ...
Analysis of metal ion release from biomedical implants
(Association of Metallurgical Engineers of Serbia, 2013)
Metallic biomaterials are commonly used for fixation or replacement of damaged bones in the human body due to their good combination of mechanical properties. The disadvantage of metals as implant materials is their ...
Electrochemical synthesis and corrosion behavior of thin polyaniline film on mild steel, copper and aluminum
(Belgrade : Association of the Chemical Engineers of Serbia, 2011)
The electrochemical synthesis of polyaniline (PANI) on mild steel, aluminum and copper from the sodium benzoate solutions has been investigated. It has been shown that thin, highly adherent, polyaniline films on the ...