Претраживање
Приказ резултата 11-20 од 107
Influence of zinc addition on anti-tarnish silver alloys in four different systems
(Belgrade : Association of Metallurgical Engineers of Serbia (AMES), 2023)
The presented paper investigates the influence of zinc addition on corrosion characteristics of different sterling silver alloy systems. Open circuit potential measurements, linear polarization resistance method, and ...
Systematic Assessment of Working Fluid Mixtures for Absorption Refrigeration Based on Process and Sustainability Indicators
(Ashrae Transactions 2021, Vol 127, Pt 1, 2021)
Absorption Refrigeration (ABR) has been widely considered as an environmentally benign cooling process. ABR employs a working fluid (WF) mixture to extract heat for cooling achieved through a series of phase changes within ...
Laser irradiation as an easy-to-apply method for Ti-based implant materials enhancement
(Vinča Institute of Nuclear Sciences - National Institute of thе Republic of Serbia, University of BelgradeSerbian Society for Innovative Materials in Extreme Conditions (SIM-EXTREME), 2022)
Hard-tissue replacements are most commonly made from the Ti-based materials, such as
commercially pure titanium (CP-Ti) and Ti-6Al-4V (mass%) alloy, because of their exceptional
biocompatible properties combined with the ...
ENHANCEMENT OF THE BIOACTIVE AND NUTRITIONAL PROPERTIES OF SOY PROTEIN CONCENTRATE THROUGH THE USE OF ENZYME TECHNOLOGY
(Belgrade : University, Faculty of Technology and Metallurgy, 2023)
Soybean, a protein-rich leguminous oilseed, is often unacceptable due to its taste,
appearance, and smell. Enzymatic technologies offer an alternative to conventional chemical
procedures for protein modification, allowing ...
Thermodynamic properties of binary system eugenol + 4- propylguaiacol in wide ranges of temperature and pressure
(Graz : Graz University of Technology, 2022)
The negative consequences of the use of fossil fuels, as well as the unsustainability of meeting ever-increasing energy requirements with limited reserves of fossil fuels, have led to the intensification of research in the ...
Influence of Cold Rolling and Annealing on the Mechanical and Corrosion Properties of an AA5182 Al-Mg Alloy
(Belgrade : Association of Metallurgical Engineers of Serbia (AMES), 2023)
In this study we investigated the effect of cold rolling reductions and different annealing conditions, on the mechanical properties and corrosion resistance of an AA5182 type Al-Mg alloy. Material was industrially produced ...
Biotehnološki postupak uklanjanja sintetičkih boja iz otpadnih voda imobilisanom peroksidazom iz rena
(Novi Sad : Prirodno-matematički fakultet, 2021)
Opšte je poznata činjenica da postoji veliki ekološki problem zagađenja životne sredine
otpadnim vodama što zahteva kolektivne napore da bi se sprečila nadolazeća ekološka katastrofa.
U ovom radu je razvijen postupak ...
Influence of the polymer matrix type on cavitation resistance of composites
(Banja Luka : Faculty of Mechanical Engineering, 2021)
Cavitation resistance of polymer matrix/basalt powder composites was determined in this work.
Two types of composites were tested: epoxy resin / basalt powder composite and polyester resin /
basalt powder composite. In ...
Experimental and theoretical UV-Vis spectral study of some arylazo pyridone dyes in amide solvents
(Belgrade : Society of Physical Chemists of Serbia, 2021)
Spectral properties of ten 5-(substituted phenylazo)-3-cyano-1-ethyl-6-hydroxy-4-methyl-2-pyridones were investigated in formamide and N,N-dimethylformamide (DMF) by combining experimental study and density functional ...
Selection of process conditions for the integrated process of supercritical CO2 extraction from green tea leaves and impregnation onto polymer films
(Budapest : University of Technology and Economics, 2023)
Green tea is considered to be a plant with a variety of health benefits due to its antioxidative, antimicrobial,
anti-inflammatory, and anticancer activity. Besides the most important bioactive constituents, including
...