Pretraživanje
Prikaz rezultata 1-10 od 108
On the synthesis of 3-cyano-6-hydroxy-4-methyl-2-pyridone at room temperature / O sintezi 3-cijano-6-hidroksi-4-metil-2-piridona na sobnoj temperaturi
(Engineering Society for Corrosion, Belgrade, Serbia, 2019)
Milling of cyanoacetamide and acetoacetic ester as reactants, in the presence of KOH as the catalyst and ethanol as a viscous control agent (VCA) was performed in a planetary ball mill with the goal of investigating the ...
The influence of chloride anions on the pitting corrosion of aluminum alloy en 46000 / Uticaj hloridnih anjona na tačkastu koroziju legure aluminijuma en 46000
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
The corrosion behavior of AlSi9Cu3 aluminum alloy, which is commonly used for manufacturing radiators of remote central heating systems, is investigated. The tendency for pitting corrosion is investigated in the phosphate ...
Solvatochromism of N-aryl-phenylacetamides / Solvatohromizam N-aril-fenilacetamida
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
Amide derivates are biologically active compounds and they are widely used in all spheres of life. Therefore, it is very important to know their physical-chemical properties. In this work the influence of characteristics ...
Synthesis of high-performance alkyd anticorrosion coatings based on waste poly(ethylene terephthalate) / Sinteza visokoefikasnih alkidnih antikorozionih premaza na bazi poli(etilen tereftalata)
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
Synthesis of high-performance anticorrosive coatings obtained from alkyd resins (ARs) based on waste poly(ethylene terephthalate) (PET) glycolyzates is presented. PET glycolyzates, synthesized by catalytic depolymerization ...
Influence of the structural changes on cavitation resistance of Al18SiCuMg alloy produced by rheocasting process / Uticaj strukturnih promena na kavitacionu otpornost Al18SiCuMg legure proizvedene reokasting procesom
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
The influence of stirring speeds of 1000 and 1500 r/min on the microstructure of Al18SiCuMg alloy was investigated. The smaller size of Si particles of rheocast sample obtained by higher cooling rate and higher stirring ...
Sub-monolayers of iridium electrodeposited on Ti2AlC substrate as catalysts for hydrogen evolution reaction in sulfuric acid solution / Nekoliko monoslojeva elektrohemijski istaloženog iridijuma na podlozi od Ti2AlC kao katalizatori za izdvajanje vodonika u rastvoru sumporne kiseline
(Engineering Society for Corrosion, Belgrade, Serbia, 2020)
The hydrogen evolution reaction (HER) was investigated at sub-monolayers of iridium electrodeposited on Ti2AlC substrate. The lowest amount of electrodeposited iridium was 3 close-packed (111) monolayers (3 ML), while the ...
Micromechanical crack analysis of glass-epoxy laminated composites subjected to tension load / Mikromehanička analiza loma laminatnog staklo-epoksi kompozitnog materijala ispitivanog na zatezanje
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
The main objective of this study is to determine tensile properties of the glass-epoxy polymer composite material. The material is glass fiber 280 g/m², 'twill woven' with 100 cm width, type - Interglas 92125, and epoxy ...
The influence of light on corrosion of polyaniline coated mild steel / Uticaj osvetljenosti na koroziju mekog čelika sa prevlakom polianilina
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
The influence of light of the mild steel corrosion in 3% NaCl solution with polyaniline coating based on the possibilities that polyaniline can generate photoelectrons, even in the laboratory conditions has been investigated.
Techno-economic analysis of unsaturated polyester production from waste PET / Tehno-ekonomska analiza proizvodnje nezasićenih poliestara iz otpadnog PET-a
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
Unsaturated polyester resins (UPe) were synthesized from maleic anhydride and products of glycolysis, obtained by polyethylene terephthalate (PET) depolymerization with dipropylene glycol (DPG) in the presence of tetrabutyl ...
Graphene reinforced hydroxyapatite biocomposite coatings obtained by electrophoretic deposition on titanium / Biokompozitne prevlake hidroksiapatita ojačane grafenom, dobijene elektroforetskim taloženjem na titanu
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
Fast ongoing research of graphene-based nanomaterials reveals that their exceptional properties could be utized for biomedical applications, especially in tissue engineering and drug delivery. Here, we summarized the results ...