Претраживање
Приказ резултата 1-10 од 113
Influence of heat transfer conditions on determination of thermal shock resistance of refractories / Uticaj prenosa toplote na određivanje termostabilnosti vatrostalnog materijala
(Savez inženjera metalurgije Srbije, Beograd, 2002)
The goal of this thesis was to determine the thermal shock resistance of alumina based refractories in the case of a heat transfer conditions different from the standard conditions given by quenching test JUS. B. D.8 319. ...
Thermal shock behavior of alumina based refractories
(Techna Srl, Faenza, 2002)
Temperature difference and fracture resistance parameters have been used to predict the thermal shock behavior. Alumina based commercial refractories with different content of Al2O3 from 28% to 78% were used. Thermal and ...
Epoxy coatings electrodeposited on aluminium and modified aluminium surfaces / Epoksidne kataforetske prevlake na aluminijumu i modifikovanim površinama aluminijuma
(Association of Chemical Engineers of Serbia, 2002)
The corrosion behaviour and thermal stability of epoxy coatings electrodeposited on modified aluminum surfaces (anodized, phosphatized and chromatized-phosphatized aluminium) were monitored during exposure to 3% NaCl ...
Finite element modeling of mechanical properties of particulate composite biomaterials
(Proceedings of the fourth Yugoslav Materials Research Society Conference (YUCOMAT IV), 2002)
The influence of inclusion geometry and volume fraction on stiffness behavior of a particle hydroxyapatite filled polymer (poly-L-lactide and collagen) matrix composite was investigated by finite element. analysis. The ...
C* integral evaluation by using EPRI procedure / Određivanje C* integrala primenom EPRI procedure
(Society for Structural Integrity and Life, Institute for Material Testing, 2002)
The EPRI procedure for evaluation of elastic-plastic fracture mechanics parameters has been described. Using an analogy of visco-plastic problem with a described procedure, the possibility of application of EPRI procedure ...
Inverse gas chromatrography of chromia. Part II. Finite surface coverage / Inverzna gasna hromatografija na hrom(III)-oksidu. Deo II
(Serbian Chemical Society, Belgrade, 2002)
The interactions of n-hexane, benzene, chloroform, and tetrahydrofuran with dried (amorphous) chromia (I) and chromia heated at 1073 K (crystalline) (II), both obtained from a colloidal dispersion, and a commercially ...
Electrophoretic deposition of thin alumina films from water suspension
(Elsevier, Amsterdam, 2002)
Alumina water suspensions have been prepared for thin alumina film deposition on steel. The type and quantity of deflocculant have been determined using zeta potential and viscosimetric measurements. The deposition was ...
Polymers contamination by heavy metal compounds / Kontaminacija polimera teškim metalima
(Association of Chemical Engineers of Serbia, 2002)
The contamination of important synthetic (surface unmodified) polymers by various heavy metal compounds (such as copper, manganese and lead) in aqueous medium was investigated in this study. The influence of the pH of the ...
Alumina/silica aerogel with zinc chloride alkylation catalyst: Influence of supercritical drying conditions and aerogel structure on alkylation catalytic activity
(Elsevier, Amsterdam, 2002)
Alumina/silica aerogel with zinc chloride alkylation catalyst, was obtained using one step sol-gel synthesis and subsequent drying with the supercritical carbon dioxide. The high density supercritical carbon dioxide drying ...
Methanol electrooxidation on supported Pt and PtRu catalysts in acid and alkaline solutions
(Pergamon-Elsevier Science Ltd, Oxford, 2002)
The kinetics of methanol oxidation on supported 47.5 wt.% Pt and 54 wt.% Pt-Ru (with nominal Pt:Ru ratios of 2:3) catalysts are measured in 0.5 M H2SO4 and 0.1 NaOH at 295 and 333 K using thin-film rotating disk electrode ...