Search
Now showing items 1-10 of 209
Computer simulation of gamma irradiation energy deposition in MOSFET dosimeters
(IEEE Transactions on Plasma Science, 2006)
The application of MOSFETs as detectors or device components in pulse power technique requires an investigation of their characteristics in radiation fields. Computing possibilities of the renowned programs FOTELP and ...
Pulse and direct current plating of Ni-W alloys from ammonia-citrate electrolyte
(Elsevier, 2006)
The effect of the potential of deposition and electrode rotation rate on current efficiency and partial current density of nickel deposition from ammonia-citrate electrolyte with and without tungstate ions was investigated. ...
Influence of an antimicrobial treatment on the strength properties of polyamide/elastane weft-knitted fabric
(Wiley, Hoboken, 2007)
Polyamide/elastane weft-knitted fabric, as a suitable compression material, was treated with gentamicin sulfate and a natural antimicrobial preparation of the autochthonous essential oil of Picea abies. The antimicrobial ...
Hydrogen evolution reaction from EDTA solutions
(4th Conference of the Yugoslav Materials Research Society, 2002)
An attempt was made to investigate the mechanism and kinetics of hydrogen evolution reaction on zinc and platinum wire electrodes from solutions containing ethylene diamine tetraacetic acid (EDTA). EDTA is a tetra-basic ...
Analysis of the properties of a Cu-Al2-O3 sintered system based on ultra fine and nanocomposite powders
(International Institute for the Science of Sintering, Beograd, 2007)
In this paper synthesis of a composite based on Cu-Al2O3 by a thermo-chemical method is shown along with a comparative analysis of the properties of the obtained nanocomposite sintered samples, which are characterized by ...
Improvement of Ethanol Fermentation of Corn Semolina Hydrolyzates with Immobilized Yeast by Medium Supplementation
(University of Zagreb, 2009)
The possibilities of improving ethanol fermentation of enzymatically obtained corn semolina hydrolyzates with alginate-immobilized yeast Saccharomyces cerevisiae var. ellipsoideus by medium supplementation with mineral ...
The Influence of Powder Particle Size on Properties of Cu-Al2O3 Composites
(International Institute for the Science of Sintering (IISS), 2009)
Inert gas atomized prealloyed copper powder containing 2 wt.% Al (average particle size approximate to 30 mu m) and a mixture consisting of copper (average particle sizes approximate to 15 mu m and 30 mu m) and 4 wt.% of ...
Contribution to study of processes on the steel cast-sand mould contact surface during casting
(Elsevier Science B.V., 2000)
The testings involved in this paper were part of a comprehensive research project conducted to find out what complex processes were taking place at metal-mould contact surface. These investigations are of particular ...
Optical fibers with composite magnetic coating
(Elsevier, 2002)
The goal of these investigations was to define the process parameters that enable the formation of a composite coating with the most uniform thickness on an optical fiber. The composite coating was obtained by drawing the ...
Nanosilica/PMMA composites obtained by the modification of silica nanoparticles in a supercritical carbon dioxide-ethanol mixture
(Springer, New York, 2009)
Nanosilica/poly(methyl methacrylate) (PMMA) composites are used to improve the mechanical properties of neat PMMA polymer. In order to obtain superior mechanical properties, it is essential to achieve good bonding between ...