Претраживање
Приказ резултата 1-10 од 18
The influences of multiscale-sized second-phase particles on fracture behaviour of overaged 7000 alloys
(Procedia Engineering, 2009)
To identify the most important parameters of multiscale microstructural features influencing the fracture modes and resistance to damage, detailed microstructural and fractographic analysis of overaged 7000 alloy plates ...
Microstructural dependence of fracture toughness in high-strength 7000 forging alloys
(Pergamon-Elsevier Science Ltd, Oxford, 2008)
The effects of microstructural parameters associated with the coarse intermetallic phases particles and precipitates on the fracture toughness of the overaged 7000 alloy forgings are investigated. Detailed microstructural ...
The influence of the deposition parameters on the porosity of thin alumina films on steel / Uticaj parametara elektroforetskog taloženja praha aluminijum-oksida iz vodenih suspenzija na poroznost dobijenih tankih filmova na čeliku
(Serbian Chemical Society, Belgrade, 2004)
The influence of the deposition parameters on the porosity of thin alumina films electrophoretically deposited on steel from aqueous suspensions was investigated. The effects of the applied voltage, deposition time, ...
Image analysis of protective layer of zinc on steel obtained using the hot process / Analiza slike za karakterisanje zaštitnog sloja cinka na čeliku dobijenog toplim cinkovanjem
(Savez inženjera metalurgije Srbije, Beograd, 2003)
The procedure for measuring the thickness of anticorrosion protective layer of zinc on steel is given. The metallographic images are used for this measurement. Results are statistically handled and results are used to ...
Influence of formation conditions and precursor viscosity on mean fiber diameter formed using the relating disk method
(Elsevier, Amsterdam, 2000)
Alumina ceramic fibers were produced from aluminum-hydroxidechloride based sol. Polyvinyl alcohol and surface active material were applied to adjust the rheological characteristics of the: sol. The rotating disk formation ...
Assessment of viscoelastic crack bridging toughening in refractory materials
(Elsevier Sci Ltd, Oxford, 2008)
Viscoelastic bridges can be formed in refractory ceramics while cooling from high temperatures. Such bridges can shield crack tips, thus reducing the effective crack tip stress intensity factors leading to higher resistance ...
The use of image analysis for the interaction of 1,3,5-trisubstituted isocyanurates with oxidizer and different binders in composite materials / Korišćenje analize slike za utvrđivanje interakcije 1,3,5-trisupstituisanih izocijanurata sa oksidansom i različitim vezivima u kompozitnim gorivima
(Association of Chemical Engineers of Serbia, 2006)
Composite propellants are non-homogenous propellants and comprise primarily crystalline oxidizer and metal fuels uniformly suspended in a resin binder. The strength of the bonds between the polymer matrix and the oxidizer ...
Rotating disk alumina precursor fiber formation process stability determination using image analysis
(Savez inženjera metalurgije Srbije, Beograd, 2002)
Precursor fibers are made from the aluminium-hydroxide chloride based sols. The process stability can be influenced both by the fiber formation conditions and the rheology of the sol. The distance from the disk canter is ...
The use of image analysis for the study of interfacial bonding in solid composite propellant / Korišćenje analize slike za određivanje interakcija u čvrstim kompozitnim gorivima
(Serbian Chemical Society, Belgrade, 2007)
In the framework of this research, the program Image Pro Plus was applied for determining the polymer-oxidizer interactions in HTPB-based composite propellants. In order to improve the interactions, different bonding agents ...
Using the image analysis program for prediction of thermal stability behavior of refractory specimen
(8th International Symposium on Multifunctional and Functionally Graded Materials, FGM2004, 2005)
Most important properties which are usually measured for refractories are work temperature and thermal stability. Thermal stability of the alumina based samples was measured using a standard laboratory procedure, the water ...