Претраживање
Приказ резултата 1-10 од 17
Synthesis and structure determination of a chain-like aluminophosphate obtained with 1,2-diaminopropane as the structure-directing agent
(Pergamon-Elsevier Science Ltd, Oxford, 2003)
Colorless plate-like crystals (AIPO-1,2DAP) crystallize from a clear 'AlPO4-1,2-diaminopropane' reaction system. The results of elemental, thermal and FTIR analyses give the following chemical formula: (NH4+)(1,2-H(2)DAP ...
PZT ceramics obtained from mechanochemically synthesized powders
(Kluwer Academic Publ, Dordrecht, 2003)
PZT ceramics were obtained from the mechanochemically synthesized powders. Milling and sintering conditions were optimized based on results of density measurements, as well as on microstructural and electrical characterization. ...
The influence of heat treatment and finishing on the mechanical and dielectric properties of glass fabric-epoxy resin laminar composites
(Springer Netherlands, 2003)
The aim of this investigation was to define the optimum conditions of obtaining glass fabric - epoxy resin laminar composites with mechanical and dielectric properties that satisfy the quality needed for production of ...
Digitally graded GaAs/Al0.44Ga0.56As quantum-cascade laser
(Elsevier, Amsterdam, 2003)
A method for the optimal design and realization of a GaAs/Al0.44Ga0.56As quantum-cascade laser (QCL) is presented. Firstly, an optimal, smooth active region profile is derived, using inverse spectral theory. A digitally ...
Correlation between apparent activation energy for hot working and temperature of no recrystallization in microalloyed steels
(Trans Tech Publications Ltd, Durnten-Zurich, 2003)
Two-stage linear ln[sinh(as)] vs 1/T plots, based on the stress data derived from either continuous or multipass flow curves generated by testing low carbon Nb/Ti microalloyed steel (Nb steel) and medium carbon V-microalloyed ...
Semi-IPNs based on polyacrylamide and poly(itaconic acid)
(Springer, New York, 2003)
Semi-IPNs based on polyacrylamide (PAAm) and poly(itaconic acid) (PIA) were prepared by two different techniques, polymerizing itaconic acid in the presence of polyacrylamide gel (Samples I) and by makiug the polyacrylamide ...
Densities, viscosities, and surface and interfacial tensions of the ternary mixture water plus ethyl butyrate plus methanol at 303.15
(Amer Chemical Soc, Washington, 2003)
The excess molar volumes, V-E, viscosity deviations, Deltaeta, and excess surface tensions were calculated from the measured density, viscosity, and surface tension values, a, over the whole miscibility composition range ...
Characterization of colloidal chromia particles obtained by forced hydrolysis
(Pergamon-Elsevier Science Ltd, Oxford, 2003)
Colloidal particles of chromia have been prepared by forced hydrolysis of an aqueous solution containing chromium chloride hexahydrate. At elevated temperature, a controlled addition of potassium hydroxide yielded colloidal ...
Surface properties of HAP particles obtained by hydrothermal decomposition of urea and calcium-EDTA chelates
(Proceedings of the 15th International Symposium on Ceramics in Medicine; The Annual Meeting of the International Society for Ceramics in Medicine, 2003)
In this paper surface properties of calcium-hydroxyapatite, synthesized by modified hydrothermal reaction of urea and Ca(EDTA)(2-) in phosphate solutions, as well as the dependence of calcium hydroxyapatite dispersion ...
Trace elements analysis of Echinacea purpurea - herbal medicinal
(Elsevier, Amsterdam, 2003)
Elemental composition of Echinacea purpurea (Asteracae), grown in Serbia under strongly controlled conditions, has been studied. To distinguish elemental patterns of different parts of the plant, the content of Zn, Fe, Cu, ...