Претраживање
Приказ резултата 1-10 од 17
Influence of Electrolytic Copper Powder Particle Morphology on Electrical Conductivity of Lignocellulose Composites and Formation of Conductive Pathways
(Electrochemical Science Group, 2014)
Composites based on polymers with conductive fillers have been gaining more significant roles in a variety of technological domains and they are getting in the research focus of numerous studies as a part of growing research ...
Mechanical features of copper coatings electrodeposited by the pulsating current (PC) regime on Si(111) substrate
(International Journal of Electrochemical Science, 2020)
Mechanical features of the Cu coatings produced by the pulsating current (PC) regime on Si(111) substrate have been investigated. The Cu coatings were electrodeposited by varying duty cycle (15-50 %) and keeping the current ...
Electrical Conductivity of Lignocellulose Composites Loaded with Electrodeposited Copper Powders. Part II. Influence of Particle Size on Percolation Threshold
(Esg, Belgrade, 2012)
This article is concerned with synthesis and characterization of electroconductive composite materials prepared by the compression molding of mixtures of lignocellulose and electrochemically deposited copper powder under ...
Carbon Supported PtSn versus PtSnO2 Catalysts in Methanol Oxidation
(International Journal of Electrochemical Science, 2021)
Pt, PtSn and PtSnO2 catalysts supported on high surface area carbon synthesized by microwave assisted polyol procedure were tested for methanol oxidation. Based on TGA, EDX and XRD analysis, PtSn/C is composed of Pt and ...
Zinc Polypyrrole-air Sea Water Battery
(Electrochemical Science Group, Beograd, 2016)
An environmentally friendly cell using polypyrrole-air regenerative cathode and zinc as anode, is investigated in the 3.5% sodium chloride solution for the possible applications as the sea water cell. It is shown that cell ...
Mechanical features of copper coatings electrodeposited by the pulsating current (PC) regime on Si(111) substrate
(Electrochemical Science Group, Beograd, 2020)
Mechanical features of the Cu coatings produced by the pulsating current (PC) regime on Si(111) substrate have been investigated. The Cu coatings were electrodeposited by varying duty cycle (15-50 %) and keeping the current ...
An Efficient Electrochemical Sensing of Caffeic Acid at Thermolysis Prepared Urea-formaldehyde Resin Modified with Fe(III) and Ti(IV) Oxide Particles
(Electrochemical Science Group, 2022)
Urea-formaldehyde resin (UF) is primarily used as an adhesive applied in the wood composites industry. In this work, we found that this resin modified with metal compounds could be a good starting point to produce ...
Formation of Disperse Silver Deposits by the Electrodeposition Processes at High Overpotentials
(Esg, Belgrade, 2012)
In this study, electrodeposition of silver from nitrate solution at the high overpotentials was analyzed. Morphologies of silver deposits obtained at the different overpotentials and with the different electrodeposition ...
Glucose Sensing Using Glucose Oxidase-GlutaraldehydeCysteine Modified Gold Electrode
(Electrochemical Science Group, Beograd, 2017)
The method to develop a stable glucose biosensor with successive attachment of cysteine (Cys), glutaraldehyde (GA) and glucose oxidase (GOx) onto gold electrode is presented. The cyclic voltammetry (CV) suggests the diffusion ...
Direct and Indirect Electrochemical Degradation of Acid Blue 111 Using IrOx Anode
(Electrochemical Science Group, Beograd, 2017)
The anthraquinone dye, C.I. Acid Blue 111, was subjected to electrochemical oxidation using an IrOx electrode and sodium sulphate or sodium chloride as electrolytes. The effects of different operating parameters on the ...