Претраживање
Приказ резултата 1-10 од 27
Corrosion behavior and thermal stability of electrodeposited PANI/epoxy coating system on mild steel in sodium chloride solution
(Elsevier Science Sa, Lausanne, 2006)
The corrosion behavior, sorption characteristics and thermal stability of epoxy coatings electrodeposited on mild steel (MS) and mild steel with electrochemically deposited polyaniline (PANI) film were investigated in 3% ...
Corrosion behaviour of thixoformed and heat-treated ZA27 alloys in NaCl solution
(Elsevier Science Bv, Amsterdam, 2013)
The influence of corrosion on the microstructure of thixoformed and heat-treated ZA27 alloys was investigated. The microstructure of ZA27 alloy was affected by heat treatment. The process of electrochemical corrosion occurs ...
Comparation of corrosion and mechanical properties of commercial and recycled 6060 and 6082 aluminium alloys
(Belgrade : Association of Metallurgical Engineers of Serbia (AMES), 2023)
Although the same quality of various metals from the recycling process is considered for granted, obtaining aluminum of high purity and aluminum alloys with identical properties as from production from pure raw materials ...
Corrosion influence on surface appearance and microstructure of compo cast ZA27/SiCp composites in sodium chloride solution
(Elsevier Science Bv, Amsterdam, 2016)
The influence of corrosion on the surface appearance and microstructure of particulate ZA27/SiCp composites was examined after 30 d immersion in a sodium chloride solution with the access of atmospheric oxygen. The composites ...
Corrosion protection of mild steel by polypyrrole coatings in acid sulfate solutions
(Pergamon-Elsevier Science Ltd, Oxford, 1997)
The corrosion behaviour of mild steel covered by the electrodeposited polypyrrole films was investigated by electrochemical impedance spectroscopy. Electrodeposition of polypyrrole was performed from aqueous solution of ...
The influence of polypyrrole films on the corrosion behavior of iron in acid sulfate solutions
(Elsevier Science Sa, Lausanne, 1998)
The corrosion behavior of mild steel covered by electrodeposited polypyrrole films was investigated by electrochemical impedance spectroscopy. Electrodeposition of polypyrrole was performed from an aqueous solution of ...
Precipitation of the beta-phase and corrosion behavior of an al-6.8 wt.% mg alloy
(John Wiley & Sons, Chichester, 2012)
This study was performed on the Al-Mg alloy with the chemical composition: Al-Mg6.8-Mn0.51-Fe0.2-Si0.1. As-received cold rolled material (O-temper) was subjected to (i) cold rolling and annealing at 265 degrees C and 320 ...
Determination of the protective properties of electrodeposited organic epoxy coatings on aluminium and modified aluminium surfaces
(Pergamon-Elsevier Science Ltd, Oxford, 2005)
The electrochemical and transport properties and thermal stability of epoxy coatings electrodeposited on aluminium and modified aluminium surfaces (anodized, phosphatized and chromatized-phosphatized aluminium) have been ...
Corrosion behaviour of epoxy coatings investigated by EIS
(Trans Tech Publications Ltd, Durnten-Zurich, 1998)
Epoxy coatings were formed by cathodic electrodeposition of an epoxy resin on steel and on electrochemically modified steel surface by Fe-P alloy using constant voltage method (resin concentration 10 wt.%, temperature 26 ...
Corrosion protection of aluminium by a cataphoretic epoxy coating
(Elsevier Science Sa, Lausanne, 1999)
The corrosion behavior and thermal stability of epoxy coating electrodeposited on aluminium have been investigated during exposure to 3% NaCl. Electrochemical impedance spectroscopy (EIS), gravimetric liquid sorption ...