Претраживање
Приказ резултата 1-10 од 17
The disbonding of powder polyester coating on steel pretreated by zinc-phosphate and iron-phosphate coatings
(Wydawnictwo SIGMA - N O T Sp. z o.o, 2013)
The influence of different types of conversion phosphate coatings on the corrosion stability of top powder polyester coating on steel was investigated. The morphology of phosphate coatings was investigated using scanning ...
Supplementary material for the article: Radojković, B.; Pejić, J.; Marunkić, D.; Simović, A.; Pantović, S. E.; Jegdić, B.; Bajat, J. Corrosion of Metal Parts in the Power Plant. Materials & Corrosion 2023. https://doi.org/10.1002/maco.202313919
(John Wiley and Sons Inc., 2023)
The AISI 304 (X5CrNi19-10) stainless steel is widely used for the production of various metal parts in power plants. A procedure for testing the influence of the dust from a power plant on resistance to general and pitting ...
Ternary Zn-Ni-Co alloy: anomalous codeposition and corrosion stability
(Srpsko hemijsko društvo, Beograd, 2015)
Electrochemically deposited Zn-Ni-Co alloys under various deposition conditions were investigated using atomic absorption spectroscopy for the determination of the chemical composition, atomic force microscopy for surface ...
Corrosion stability of cerium-doped cataphoretic epoxy coatings on AA6060 alloy
(Wiley-VCH Verlag Gmbh, Weinheim, 2016)
In this study, corrosion protection efficiency of undoped epoxy and epoxy coating doped with cerium on aluminum alloy AA6060 is evaluated over prolonged exposure to 3wt% NaCl solution by electrochemical impedance spectroscopy ...
Electrodeposition and characterization of Zn-Ni alloys as sublayers for epoxy coating deposition
(Springer, Dordrecht, 2001)
The chemical composition and phase structure of Zn-Ni alloys obtained by electrodeposition under various conditions were investigated. The influence of the deposition solution and deposition current density on the composition, ...
Protective properties of epoxy coatings electrodeposited on steel electrochemically modified by Zn-Fe alloys / Zaštitna svojstva epoksidnih kataforetskih prevlaka na čeliku elektrohemijski modifikovanom Zn-Fe legurama
(Association of Chemical Engineers of Serbia, 2004)
Epoxy coatings were electrodeposited on steel and steel modified by Zn-Fe alloys using the constant voltage method. Zn-Fe alloys were electrodeposited on steel at different current densities. The effect of the Zn-Fe alloy ...
Determination of the protective properties of electrodeposited organic epoxy coatings on aluminium and modified aluminium surfaces
(Pergamon-Elsevier Science Ltd, Oxford, 2005)
The electrochemical and transport properties and thermal stability of epoxy coatings electrodeposited on aluminium and modified aluminium surfaces (anodized, phosphatized and chromatized-phosphatized aluminium) have been ...
Protective properties of epoxy coatings electrodeposited on steel electrochemically modified by Zn-Ni alloys
(Elsevier Science Sa, Lausanne, 2004)
A review is given on Zn-Ni alloys electrochemically deposited on steel under various deposition conditions. The influence of deposition current density and type of deposition solution on the chemical content, phase structure ...
The influence of zinc surface pretreatment on the adhesion of epoxy coating electrodeposited on hot-dip galvanized steel
(Elsevier Science Sa, Lausanne, 2007)
The adhesion and electrochemical properties of epoxy coatings electrodeposited on hot-dip galvanized steel with and without passive films were investigated during exposure to 3% NaCl. The passive films were formed in hot ...
Corrosion behaviour of epoxy coatings electrodeposited on galvanized steel and steel modified by Zn-Ni alloys
(Elsevier Science Sa, Lausanne, 2000)
The electrochemical and transport properties and thermal stability of epoxy coatings electrodeposited on hot-dip galvanized steel and steel modified by Zn-Ni alloys were investigated during exposure to 3% NaCl solution. ...