Pretraživanje
Prikaz rezultata 1-10 od 59
Corrosion protection of aluminum by vinyltriethoxysilane coatings / Koroziona stabilnost prevlaka viniltrietoksisilana
(Engineering Society for Corrosion, Belgrade, Serbia, 2008)
In this work the influence of the deposition parameters, i.e. silane solution concentration, deposition time and curing time on the corrosion stability of vinyltriethoxysilane (VTES) coatings on aluminum was investigated. ...
Corrosion behavior and thermal stability of electrodeposited PANI/epoxy coating system on mild steel in sodium chloride solution
(Elsevier Science Sa, Lausanne, 2006)
The corrosion behavior, sorption characteristics and thermal stability of epoxy coatings electrodeposited on mild steel (MS) and mild steel with electrochemically deposited polyaniline (PANI) film were investigated in 3% ...
The Corrosion Behavior of an Ag43Cu37Zn20 Alloy in the Natural Seawaters
(Japan Inst Metals, Sendai, 2015)
We investigated the effects of natural seawater on the corrosion of an Ag43Cu37Zn20 alloy. The alloy was a commercial brazing filler alloy of composition (BS1845:1984 Ag5) and belongs to the class of Cd-free silver brazing ...
Modified tannins for alkyd based anticorrosive coatings / Primena modifikovanih tanina u antikorozionim alkidnim premazima
(Engineering Society for Corrosion, Belgrade, Serbia, 2019)
The study of the synthesis of anticorrosive inhibitors, based on chemically modified tannins, and their use in alkyd based coatings to improve anticorrosive properties is presented in this work. Two methods of tannin ...
Corrosion behaviour of thixoformed and heat-treated ZA27 alloys in NaCl solution
(Elsevier Science Bv, Amsterdam, 2013)
The influence of corrosion on the microstructure of thixoformed and heat-treated ZA27 alloys was investigated. The microstructure of ZA27 alloy was affected by heat treatment. The process of electrochemical corrosion occurs ...
Laser cleaning of textile artifacts with metal threads: Process parameter optimization / Lasersko čišćenje tekstilnih eksponata sa korodiranim metalnim nitima - optimzacije parametara procesa
(Military Technical Institute, Belgrade, 2014)
This paper presents the results of the laser cleaning effects on textile samples with corroded metallic threads. In many museum collections, there are textile exhibits like uniforms, national costumes, flags and home ...
Oxidation and erosion behaviour of SiC-HfC multilayered composite
(Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad, 2014)
The fabrication of SiC-HfC ceramic composite via self-propagating high-temperature synthesis and simultaneous consolidation was investigated. Dense composite consisting of alternating layers of SiC and HfC was obtained by ...
Corrosion influence on surface appearance and microstructure of compo cast ZA27/SiCp composites in sodium chloride solution
(Elsevier Science Bv, Amsterdam, 2016)
The influence of corrosion on the surface appearance and microstructure of particulate ZA27/SiCp composites was examined after 30 d immersion in a sodium chloride solution with the access of atmospheric oxygen. The composites ...
The importance of using hydrogen evolution inhibitor during the Zn and Zn-Mn electrodeposition from ethaline
(Srpsko hemijsko društvo, Beograd, 2019)
Cyclic voltammetry was used for the characterization of zinc electro-deposition on steel from ethaline deep eutectic solution (1:2 choline chloride:ethylene glycol). The influence of 4-hydroxy-benzaldehyde (HBA) as an ...
Synthesis of high-performance alkyd anticorrosion coatings based on waste poly(ethylene terephthalate) / Sinteza visokoefikasnih alkidnih antikorozionih premaza na bazi poli(etilen tereftalata)
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
Synthesis of high-performance anticorrosive coatings obtained from alkyd resins (ARs) based on waste poly(ethylene terephthalate) (PET) glycolyzates is presented. PET glycolyzates, synthesized by catalytic depolymerization ...