Претраживање
Приказ резултата 1-10 од 852
Correlation between apparent activation energy for hot working and temperature of no recrystallization in microalloyed steels
(Trans Tech Publications Ltd, Durnten-Zurich, 2003)
Two-stage linear ln[sinh(as)] vs 1/T plots, based on the stress data derived from either continuous or multipass flow curves generated by testing low carbon Nb/Ti microalloyed steel (Nb steel) and medium carbon V-microalloyed ...
On the aqueous oxidation of polymetallic Cu-Zn-Pb gold-bearing sulphide ore in an autoclave
(CIM Bulletin, 2001)
The paper presents a study on the oxidation of polymetallic gold ore by oxygen in an autoclave. It presents optimum parameters of autoclave leaching of sulphide refractory ore in self-generated sulphuric acid solutions ...
Thermodynamic modeling of vapor-liquid equilibria and excess properties of the binary systems containing diethers and n-alkanes by cubic equation of state
(Korean Institute Chemical Engineers, Seoul, 2004)
A comparison of the performances of two different approaches of cubic equations of state models, based on a classical van der Waals and mixing rules incorporating the G(E) equation, was carried out for correlation of ...
The non-oxidative thermal degradation of poly(di-n-alkyl itaconates). I. Analysis of the thermolysis volatiles
(Elsevier Sci Ltd, Oxford, 2005)
The volatiles arising from the thermal degradation of poly(di-n-alkyl itaconates) with ester substituents ranging from methyl to n-octyl were analysed. The corresponding monomer was found to be the major degradation product. ...
A new approach to the velocity field investigation in case of the entry flow in curved pipes with circular cross section
(Springer Wien, Wien, 2000)
In this paper an analysis of a laminar flow in a bend preceded by the straight section is presented. The flow is supposed to be unperturbed far upstream, while far downstream it becomes fully developed. In the vicinity of ...
Adhesion and corrosion resistance of epoxy primers used in the automotive industry
(Taylor & Francis Ltd, Abingdon, 2007)
One of the most important factors in corrosion prevention by protective coatings is the loss of adhesion of the coating under environmental influence. Thus, adhesion strength is often used when characterizing protective ...
Thermal stability of starch benzoate
(Elsevier Sci Ltd, Oxford, 2005)
Starch esterification with benzoyl chloride was performed in two steps, the first being the alkali treatment of the starch and the second, esterification. Samples of hydrophobic starch benzoate were synthesized with degrees ...
Indentation damage detection in thermoplastic composite laminates by using embedded optical fibers
(Journal of Advanced Materials, 2005)
In recent years, optical fibers have received attention as sensors for the purpose of in-service health monitoring in composite materials. Advantages of optical fiber sensors over conventional sensing methods are well-known ...
Electrochemical studies on LaNi4.15Co0.43Mn0.40Fe0.02 metal hydride alloy
(Elsevier Science Sa, Lausanne, 2000)
Electrochemical studies were performed on LaNi4.15Co0.43Mn0.40Fe0.02. alloy electrode. The kinetics of the electrochemical hydrogen absorption/desorption reaction was studied by DC polarization and AC impedance measurements. ...
Refining of corrosive insulating oils by selective liquid-liquid extraction process
(42nd International Conference on Large High Voltage Electric Systems 2008, CIGRE 2008, 2008)
In recent years copper sulphide formation in transformer windings has been recognized as one significant risk factor for operation of power transformers, due to number of failures which have occurred as a consequence of ...