Претраживање
Приказ резултата 1-10 од 26
Electrodeposition of Ni-Mo alloy coatings and their characterization as cathodes for hydrogen evolution in sodium hydroxide solution
(Elsevier, 2008)
The hydrogen evolution reaction on the electrodeposited Ni-Mo alloy coatings, as well as their electrochemical properties in the NaOH solutions, have been investigated by the polarization measurements, cyclic voltammetry ...
Effect of temperature on the electrodeposition of disperse copper deposits / Uticaj temperature na elektrohemijsko taloženje disperznih taloga bakra
(Serbian Chemical Society, 2007)
The effect of temperature on the electrodeposition of copper at overpotentials belonging to the plateau of the limiting diffusion current density and higher was examined by the determination of the average current efficiency ...
Effect of non-stationary current regimes on the morphology of silver electrodeposits / Efekat nestacionarnih strujnih režima na morfologiju taloga srebra
(Serbian Chemical Society, Belgrade, 2009)
This work is concerned with the use of reverse current regimes in order to form small-grained and compact silver deposits during the electrorefining process. Several parameters were varied, i.e., i) anodic overpotential, ...
The effect of hydrogen codeposition on the morphology of copper electrodeposits. 1. The concept of effective overpotential
(Elsevier, 2006)
The effect of hydrogen codeposition on the morphology of copper electrodeposits was studied. The dependences of the overall current and the volume of evolved hydrogen on the quantity of electricity used were plotted and ...
Electrochemically deposited Ni+WC composite coatings obtained under constant and pulsating current regimes
(Netherlands : Kluwer Academic Publishers, 2004)
A series of Ni+WC composite coatings were obtained by electrodeposition on a rotating disc electrode (RDE)from a commercially available Watts bath containing additives for brightness and smoothing and insoluble WCparticles, ...
Determination of the protective properties of electrodeposited organic epoxy coatings on aluminium and modified aluminium surfaces
(Pergamon-Elsevier Science Ltd, Oxford, 2005)
The electrochemical and transport properties and thermal stability of epoxy coatings electrodeposited on aluminium and modified aluminium surfaces (anodized, phosphatized and chromatized-phosphatized aluminium) have been ...
Electrodeposition and characterization of Fe-Mo alloys as cathodes for hydrogen evolution in the process of chlorate production / Elektrohemijsko taloženje i karakterizacija Fe-Mo legura kao katoda za reakciju izdvajanja vodonika u industrijskom procesu proizvodnje hlorata
(Serbian Chemical Society, Belgrade, 2005)
Fe–Mo alloys were electrodeposited from a pyrophosphate bath using a single diode rectified AC current. Their composition and morphology were investigated by SEM, optical microscopy and EDS, in order to determine the ...
Cross-section analysis of the morphology of electrodeposited copper obtained in the hydrogen co-deposition range / Morfologija poprečnog preseka prevlaka bakra dobijenih elektrohemijskim taloženjem u oblasti ko-depozicije vodonika
(Serbian Chemical Society, 2009)
Cross-section analysis of copper deposits electrodeposited in the hydrogen co-deposition range at a constant overpotential and in a pulsating overpotential (PO) regime was performed. It was shown that a complete structural ...
Electrochemical properties and thermal stability of epoxy coatings electrodeposited on aluminium and modified aluminium surfaces / Elektrohemijske karakteristike i termička stabilnost epoksidnih kataforetskih prevlaka na aluminijumu i modifikovanim površinama aluminijuma
(Serbian Chemical Society, Belgrade, 2001)
The corrosion behavior of epoxy coatings electrodeposited on aluminum, as well as on electrochemically and chemically modified aluminum were investigated during exposure to 3 % NaCl. Electrochemical impedance spectroscopy ...
Electrochemical deposition and characterization of zinc-nickel alloys deposited by direct and reverse current / Elektrohemijsko taloženje i karakterizacija legura cink-nikal dobijenih konstantnom i reversnom strujom
(Serbian Chemical Society, Belgrade, 2005)
Zn-Ni alloys electrochemically deposited on steel under various deposition conditions were investigated. The alloys were deposited on a rotating disc electrode and on a steel panel from chloride solutions by direct and ...