Претраживање
Приказ резултата 1-10 од 69
Protective properties of epoxy coatings electrodeposited on steel electrochemically modified by Zn-Ni alloys
(Elsevier Science Sa, Lausanne, 2004)
A review is given on Zn-Ni alloys electrochemically deposited on steel under various deposition conditions. The influence of deposition current density and type of deposition solution on the chemical content, phase structure ...
Corrosion behaviour of epoxy coatings electrodeposited on galvanized steel and steel modified by Zn-Ni alloys
(Elsevier Science Sa, Lausanne, 2000)
The electrochemical and transport properties and thermal stability of epoxy coatings electrodeposited on hot-dip galvanized steel and steel modified by Zn-Ni alloys were investigated during exposure to 3% NaCl solution. ...
Precipitation of the beta-phase and corrosion behavior of an al-6.8 wt.% mg alloy
(John Wiley & Sons, Chichester, 2012)
This study was performed on the Al-Mg alloy with the chemical composition: Al-Mg6.8-Mn0.51-Fe0.2-Si0.1. As-received cold rolled material (O-temper) was subjected to (i) cold rolling and annealing at 265 degrees C and 320 ...
Problems and prospect of Al-Mg alloys application in marine constructions
(Savez inženjera metalurgije Srbije, Beograd, 2006)
The position of steel as the most widely used material in the shipbuilding industry originates from the superior mechanical properties and low manufacturing costs The increasing demands for lowering the weight of different ...
Corrosion behaviour of epoxy coatings investigated by EIS
(Trans Tech Publications Ltd, Durnten-Zurich, 1998)
Epoxy coatings were formed by cathodic electrodeposition of an epoxy resin on steel and on electrochemically modified steel surface by Fe-P alloy using constant voltage method (resin concentration 10 wt.%, temperature 26 ...
Epoxy coatings electrodeposited on aluminium and modified aluminium surfaces / Epoksidne kataforetske prevlake na aluminijumu i modifikovanim površinama aluminijuma
(Association of Chemical Engineers of Serbia, 2002)
The corrosion behaviour and thermal stability of epoxy coatings electrodeposited on modified aluminum surfaces (anodized, phosphatized and chromatized-phosphatized aluminium) were monitored during exposure to 3% NaCl ...
Characterization of oxide coatings formed by plasma electrolytic oxidation of aluminum in sodium tungstate / Karakterizacija oksidnih slojeva dobijenih plazma elektrolitičkom oksidacijom aluminijuma u natrijum volframatu
(Engineering Society for Corrosion, Belgrade, Serbia, 2013)
This paper presents our recent research on morphology and phase composition of oxide coatings formed by plasma electrolytic oxidation of aluminum in 0.1 M sodium tungstate at constant current density of 15 mA/cm2 and ...
Corrosion behaviour of thixoformed and heat-treated ZA27 alloys in NaCl solution
(Elsevier Science Bv, Amsterdam, 2013)
The influence of corrosion on the microstructure of thixoformed and heat-treated ZA27 alloys was investigated. The microstructure of ZA27 alloy was affected by heat treatment. The process of electrochemical corrosion occurs ...
Oxidation and erosion behaviour of SiC-HfC multilayered composite
(Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad, 2014)
The fabrication of SiC-HfC ceramic composite via self-propagating high-temperature synthesis and simultaneous consolidation was investigated. Dense composite consisting of alternating layers of SiC and HfC was obtained by ...
Corrosion stability of cerium-doped cataphoretic epoxy coatings on AA6060 alloy
(Wiley-VCH Verlag Gmbh, Weinheim, 2016)
In this study, corrosion protection efficiency of undoped epoxy and epoxy coating doped with cerium on aluminum alloy AA6060 is evaluated over prolonged exposure to 3wt% NaCl solution by electrochemical impedance spectroscopy ...