Претраживање
Приказ резултата 1-10 од 163
Analysis of the transferability of micromechanical parameters of damage of steel under the conditions of ductile-fracture initiation
(Springer, New York, 2002)
For the description of the mechanical behavior of a cracked material, we use a macromechanical model of fracture based on the well-known criterion of plastic yield for porous materials. This model is realized as a computational ...
Excess molar volumes of N-methylacetamide + tetrahydrofuran, +2-butanone, +ethylacetate at the temperatures between 303.15 K and 318.15 K
(Elsevier, 2005)
Excess molar volumes, V m E , of N-methylacetamide (NMA) + tetrahydrofuran (THF), NMA + 2-butanone (B) and NMA + ethylacetate (EA) have been determined at the temperatures: 303.15 K, 308.15 K, 313.15 K, 318.15 K. The results ...
Low pressure RF capacitively coupled plasma reactor for modification of seeds, polymers and textile fabrics
(6th Conference of the Yugoslav Materials Research Society, YUCOMAT VI: Current Research in Advanced Materials and Processes, 2005)
Plasma reactor operating at low pressures (0.2-1 Torr) at 13.56 MHz has been developed with an idea to optimize the treatment of polymers, biological and textile materials. The reactor proved very effective in treatment ...
Preparation of a-TCP cements from calcium deficient hydroxyapatite obtained by hydrothermal method
(Trans Tech Publications Ltd, Durnten-Zurich, 2006)
In this paper the synthesis of bioactive cement based on al-Ca-3(PO4)(2) (a-TCP) and calcium deficient hydroxyapatite (CDHAp), obtained by hydrothermal method from CaCl2, EDTA, NaH(2)PO(4)(.)12H(2)O and urea at 160 degrees ...
Stability of Metal-Oxide Varistor Characteristics in Exploitation Conditions
(Acta Physica Polonica A, 2009)
Wide-spread use of metal-oxide varistors for non-linearity over-voltage protection results in a variety of possible working conditions. It is therefore essential to have a thorough insight into their reliability in various ...
Phenomenology of a formation of a honeycomb-like structure during copper electrodeposition
(Journal of Solid State Electrochemistry, 2007)
In this paper, the phenomenology of a formation of a honeycomb-like structure was considered. Copper deposits obtained at overpotential of 1000 mV were examined by scanning electron microscopy (SEM) technique. It was shown ...
Enumeration of labelled quasi-initially connected digraphs
(Elsevier, 2000)
A new class of connected digraphs is introduced - the class of quasi-initially connected digraphs. They are enumerated in the labelled case. Using the apparatus developed for labelled quasi-initially connected digraphs ...
Reflection and structural analyses of mirror-bright metal coatings
(Springer, 2004)
Reflection and structural analyses of different copper and zinc coatings were performed. The copper coatings were electrodeposited from a sulfate solution in the presence of thiourea, as well as in the presence of modified ...
Damage Level Estimate of API J55 Steel for Welded Seam Casing Pipes
(Strojarstvo, 2009)
The subject of this paper is investigation of the damage level of API J55 steel, used for manufacturing casing pipes by high frequency (HF) contact welding. The analysed pipe was withdrawn after about 70 000 hours of service ...
Electrocatalytic properties of surface oxides on gold, platinum, and stainless steel electrodes in electrooxidation of malic acid
(Maik Nauka-Interperiodica Publishing, 2005)
Electrocatalytic properties of oxides formed at gold, platinum, and stainless steel electrodes in the malic acid electrooxidation in 0.1 M Na 2 SO 4 are studied. Gas chromatographic analysis of the electrolyte after holding ...