Претраживање
Приказ резултата 181-190 од 201
Microstructure of LaNiO3 thin films obtained by the spin-on technique from citrate precursors
(Elsevier Sci Ltd, Oxford, 2008)
The morphology of perovskite LaNiO3 (LNO) thin films is a very important feature considering the fact that they could be used as an electrode material in ferroelectric devices. In this work, LNO films were prepared from ...
Modelling of ductile fracture initiation in strength mismatched welded joint
(Pergamon-Elsevier Science Ltd, Oxford, 2008)
In this paper, the effect of strength mismatch and width of the welded joints oil the stress-strain distribution in the crack tip region has been discussed. The single-edge notched bend (SENB) specimens (precrack length ...
Mechanochemical synthesis of nanocrystalline titanium monoxide
(Elsevier, 2008)
Nanocrystalline cubic titanium monoxide, TiOx (0.92 < x < 1.19), with mean crystallite size of ≈ 6 nm, was synthesized by mechanochemical treatment of Ti and TiO2 (rutile) powder mixtures with molar ratios of 1:1, ...
Toksičnost rastvora baznih boja nakon sorpcije na netkanom materijalu na bazi vune kao sekundarne sirovine obrađenom vodonik-peroksidom / The toxicity of basic dyes solution after the sorption on recycled wool-based nonwoven material treated by hydrogen peroxide
(Beograd : Srpsko hemijsko društvo, 2008)
U ovom radu je ispitana akutna toksičnost rastvora baznih boja C.I. Basic Yellow 28 i C.I. Basic
Red 46 pre i posle sorpcije na netkanom materijalu na bazi vune kao sekundarne sirovine, koji je
obrađen vodonik-peroksidom. ...
Modeling of the substrate and product transfer coefficients for ethanol fermentation
(WILEY-VCH Verlag GmbH & Co., 2008)
The transfer phenomena of the substrate and product for ethanol fermentation with immobilized biocatalyst were investigated. Fermentation was carried out with a biocatalyst consisting of Ca-alginate gel in the form of ...
Preparation of biodegradable porous poly(butylene succinate) microspheres / Dobijanje poroznih biodegradabilnih mikrosfera poli(butilen sukcinata)
(Association of Chemical Engineers of Serbia, 2008)
The aim of this study was to determine the optimal conditions for the fabrication of porous microspheres based on poly(butylene succinate), PBS. The biodegradable non-porous PBS microspheres were prepared by the oil-in-water ...
Parallel glide: Flow of dislocations with internal stress source/sink distribution
(Taylor & Francis Group, 2008)
The unexpected glide of dislocations on a plane parallel to the film/substrate interface in ultrathin copper films, which has been called parallel glide (Balk et al 2003 Acta Metall. 51 447), is described using an analytical ...
Application of the residual strength degradation model to carbon-epoxy composite
(Consultants Bureau/Springer, New York, 2008)
A residual strength degradation model for two orientations of fibers of carbon-epoxy composite is proposed. The model is constructed on the basis of an analysis of a gradual decrease in the residual strength of the composite ...
The influence of the woven construction on breaking load and relaxation / Uticaj konstrukcije tkanine na prekidnu silu i relaksaciju
(Union of Textile Engineers and Technicians of Serbia, Belgrade, 2008)
This article presents part of an extensive study of the deformity mechanism of weaves, which dealing with the influence of various parameters of fabric behavior under action of different mechanical loads. Investigation of ...
Occurrence and fate of emerging wastewater contaminants in Western Balkan Region
(Elsevier B.V., 2008)
This paper reports on a comprehensive reconnaissance of over seventy individual wastewater contaminants in the region of Western Balkan (WB; Bosnia and Herzegovina, Croatia and Serbia), including some prominent classes of ...