Search
Now showing items 11-20 of 46
Optimal conditions of vacuum distillation process for obtaining the high grade pure magnesium / Optimalni uslovi porcesa vakuumske destilacije za dobijanje magnezijuma visoke čistoće
(Savez inženjera i tehničara Srbije, Beograd, 2014)
In this paper the procedure of obtaining of high purity magnesium by using the vacuum distillation process has been shown. Vacuum distillation process has been conducted under low and high vacuum at different operating ...
Analysis of catalyst wetting efficiency influence on performances of industrial TBR for hydro desulfurization and hydro de aromatization reactions / Analiza uticaja ovlaženosti katalizatora u industrijskom TBR reaktoru na reakcije hidrodesulfurizacije i hidrodearomatizacije
(Savez inženjera i tehničara Srbije, Beograd, 2015)
Many industrial scale trickle bed reactors (TBR) operate at lower liquid superficial velocities ( lt 0.5 cm/s) at which the catalyst particle are not completely wetted. This phenomenon of incomplete wetting has therefore ...
Effect of tracers molecular weight on the release process from alginate microbeads / Uticaj molekulske mase trejserskih indikatora na kontrolisano otpuštanje iz alginatnih mikročestica
(Savez inženjera i tehničara Srbije, Beograd, 2015)
The aim of this paper is to obtain microbeads of natural polymers such as alginate and chitosan. These microbeads were used as potential carriers for the active ingredients so that in this study the diffusion of various ...
Formic acid electrooxidation on carbon supported platinum catalyst with preferential plane orientation / Oksidacija mravlje kiseline na platinskim katalizatorima na ugljeničnom nosaču sa preferencijalno orijentisanim ravnima
(Savez inženjera i tehničara Srbije, Beograd, 2015)
Pt-based nanocatalysts supported on Vulcan XC-72R carbon, were prepared by water-in-oil microemulsion method, with addition of various amounts of HCl in the water phase. Polyethileneglycoldodecylether (BRIJ 30) was used ...
The application of the zeolyte powder for the construction of the dense composite membranes for the carbon-dioxide separation / Primena zeolitnih prahova za izradu kompozitnih polimernih membrana za separaciju ugljen-dioksida
(Savez inženjera i tehničara Srbije, Beograd, 2015)
The main task of the work is to construct the polymeric membrane that could be used for the waste gases treatment. For this purpose, membrane must have high permeability for the carbon dioxide and low permeability of the ...
Effect of alumina based particles on mechanical properties and resistance to acryloid composites cavitation / Uticaj čestica na bazi aluminijum oksida na mehanička svojstva i otpornost na kavitaciju akriloidnih kompozita
(Savez inženjera i tehničara Srbije, Beograd, 2018)
In the processes of preservation and restoration of sculptures and archaeological objects, copolymer materials of acrylate type are used because they have proved useful in conservation practice. The main disadvantage of ...
Impact testing with controlled energy of multiaxial aramid fabrics with various types of reinforcement / Ispitivanje udarima kontrolisane energije multiaksijalnih aramidnih lamina sa različitim tipovima ojačanja
(Savez inženjera i tehničara Srbije, Beograd, 2015)
The physical and mechanical properties of the six samples of polyurethane/p-aramid multiaxial fabric forms (Kolon fabrics) were analyzed by high speed impact tester. The samples were impregnated with 10 wt.% poly (vinyl ...
Simulation of blast furnace operation during the substitution of coke and pulverized coal with granulated waste plastic / Simulacija rada visoke peći prilikom supstitucije koksa i sprašenog uglja granulisanom otpadnom plastikom
(Savez inženjera i tehničara Srbije, Beograd, 2014)
The possibility of using the waste plastic as reducing agent in blast furnace for obtaining pig iron is in focus for the past couple year. The simulation of blast furnace process in BFC software has been performed in order ...
Metallurgical processing of copper secondary raw materials / Metalurška prerada sekundarnih sirovina bakra
(Savez inženjera i tehničara Srbije, Beograd, 2015)
Procedures for copper secondary raw materials processing include two basic stages: pretreatment of the copper waste and its further metallurgical processing. For copper waste pretreatment technology, there are different ...
Antimicrobial hydrogels based on 2-hydroxyethyl methacrylate and itaconic acid containing silver(I) ion / Antimikrobni hidrogelovi na bazi 2-hidroksietil metakrilata i itakonske kiseline koji sadrže srebro(I) jon
(Savez inženjera i tehničara Srbije, Beograd, 2014)
The objective of our study was to develop new antimicrobial hydrogels silver/poly(2-hydroxyethyl methacrylate/ itaconic acid) (Ag/P(HEMA/IA)). The P(HEMA/IA) samples, with different HEMA/IA ratio, were prepared by free ...