Pretraživanje
Prikaz rezultata 21-28 od 28
The thermal degradation of some isomers of poly(di-butyl itaconates)
(Elsevier, Amsterdam, 1999)
The non-oxidative and oxidative thermal degradation of poly(di-iso-butyl itaconate) (PDiBI), poly(di-n-butyl itaconate) (PDnBI), and poly(di-sec-butyl itaconate) (PDsBI) were studied by following changes in the polymer ...
Oxygen reduction reaction on Pt(111): effects of bromide
(Elsevier Science Sa, Lausanne, 1999)
Using the rotating ring-disk technique (RRDE) the oxygen reduction reaction (orr) was studied on the Pt(111) surface in the presence of Br- anions. We found that the orr at the Pt(111) \ Br-ad interface is always accompanied ...
Study of thermal stability of epoxy coatings electrodeposited on different substrates
(Elsevier Sci Ltd, Oxford, 1999)
The thermal stability of epoxy coatings electrodeposited on steel, phosphatized steel, steel electrochemically modified by Zn-Ni alloys and aluminium has been investigated. Epoxy coatings were formed by cathodic electrodeposition ...
Formability of a high-strength Al Mg6.8 type alloy sheet
(Springer, New York, 1998)
Room temperature formability testing was performed on an AlMg6.8 type alloy sheet with a fully recrystallized structure (average grain diameter similar to 18 mu m) and after partial annealing with a retained deformed ...
Retention behavior of some amides in reversed- and normal-phase thin-layer chromatography
(Springer Heidelberg, Heidelberg, 1992)
The retention behavior and separation ability of reversed- and normal-phase TLC with, polar and nonpolar mobile phases, has been studied by measuring the retentions of a series of amides. The retention behavior and separation ...
Thermal shock behavior of alumina based refractories: fracture resistance parameters and water quench test
(Elsevier, Amsterdam, 1999)
The prediction of refractories thermal shock behavior can be estimated on two basis: heat transfer conditions and/or fracture mechanics concept. Materials considered in our analysis were alumina based refractories with ...
An intensity based optical fibre sensor for flexural damage detection in woven composites
(Sage Publications Ltd, London, 1999)
Flexural deformation of the composite laminate and the integrity of the embedded optical fibres under three-point bending load were monitored. Signal attenuation in optical fibres was used as the damage indicator. The ...
Hydrogen peroxide oxidation on passive iron in alkaline solutions
(Pergamon-Elsevier Science Ltd, Oxford, 1992)
The kinetics of hydrogen peroxide oxidation were studied on passive iron in alkaline solutions of pH ranging from 9.8 to 13.8, using the rotating disk electrode. Measurements were taken using the linear sweep technique. ...