Search
Now showing items 21-30 of 70
Influence of different carbon monolith preparation parameters on pesticide adsorption / Uticaj parametara dobijanja karbon monolita na adsorpciju pesticida
(Serbian Chemical Society, Belgrade, 2013)
The capacity of carbon monolith for pesticide removal from water, and the mechanism of pesticide interaction with the carbon surface were examined. Different carbon monolith samples were obtained by varying the carbonization ...
Analytical methods for arsenic speciation analysis / Analitičke metode za analizu arsenovih jedinjenja
(Serbian Chemical Society, Belgrade, 2013)
Arsenic exists in the form of various chemical species differing in their physicochemical behaviour, toxicity, bioavailability and biotransformation. The determination of arsenic species is an important issue for environmental, ...
Closing the Loop: Dyeing and Adsorption Potential of Mulberry Wood Waste
(Journal of Natural Fibers, 2022)
This study reports the successful transformation of mulberry wood waste into natural textile dye and adsorbent for Pb2+ ions from an aqueous solution. Fabrics of different chemical compositions were dyed using mulberry ...
Separation and determination of dimethylarsenate in natural waters / Razdvajanje i određivanje dimetilarsenata u prirodnim vodama
(Serbian Chemical Society, Belgrade, 2012)
A simple and efficient method for the separation and determination of dimethylarsenate DMAs(V) was developed in this work. Two resins, a strong base anion exchange (SBAE) resin and iron-oxide coated hybrid (HY) resin were ...
Removal of a cationic dye from water by activated pinecones
(Srpsko hemijsko društvo, Beograd, 2012)
Adsorption of a cationic phenothyazine dye, Methylene Blue onto activated carbon prepared from pinecones was investigated. The parameters contact time, dye concentration and pH were varied. The kinetic data were found to ...
Oxidized and Ethylenediamine-Functionalized Multi-Walled Carbon Nanotubes for the Separation of Low Concentration Arsenate from Water
(Taylor & Francis Inc, Philadelphia, 2013)
In this work multiwalled carbon nanotubes (MWCNTs) modified by oxidation (o-MWCNTs) and by aminofunctionalization (e-MWCNTs) were examined as potential adsorbents for arsenate removal from water. Adsorption characteristics ...
Application of raw volcanic rock found in etna valley as an adsorbent of chromates, arsenates and selenates
(Savez inženjera metalurgije Srbije, Beograd, 2018)
This paper aims to determine the potential of volcanic rock found in Etna valley as an adsorbent of heavy metals in anionic form (chromates, arsenates, and selenates). Characterization of the volcanic rock was done with ...
Removal of heavy metals from water using multistage functionalized multiwall carbon nanotubes
(Srpsko hemijsko društvo, Beograd, 2017)
The multistage synthesis of the multi-wall carbon nanotubes (MWCNT) modified with polyamidoamine dendrimers, A1/and A2/MWCNT, capable of cation removal, is presented in this work, as well as novel adsorbents based on these ...
The Application of a Natural Zeolite for Acid Mine Drainage Purification
(Japan Inst Metals & Materials, Sendai, 2015)
A natural zeolite from Serbia was employed for the removal of heavy metals from acid mine drainage (AMD) generated in the area of copper mine. The efficiency of the natural zeolite samples was tested on AMD that contained ...
Bisphenol a removal from aqueous solution using fine alpha-fe2o3 particles
(Savez inženjera metalurgije Srbije, Beograd, 2018)
Iron(III) oxide particles (alpha-Fe2O3) were obtained from ferrous chloride (FeCl3 center dot 6H(2)O) precursor using ammonium hydroxide as a precipitating agent and particles were calcined at 700 degrees C for 4 h. ...