Претраживање
Приказ резултата 21-30 од 62
The effect of Zn-Ni sublayers on the corrosion behaviour and thermal stability of epoxy coatings electrodeposited on steel / Uticaj Zn-Ni podslojeva na koroziono ponašanje i termičku stabilnost epoksidnih elektroforetskih prevlaka na čeliku
(Serbian Chemical Society, Belgrade, 2000)
The electrochemical and transport properties, as well as the thermal stability of epoxy coatings electrodeposited on steel and steel modified by Zn-Ni alloys were investigated during exposure to 3 % NaCl. The Zn-Ni alloys ...
Electrochemical and sorption characteristics and thermal stability of epoxy coatings electrodeposited on steel modified by Zn-Co alloy
(Elsevier Science Sa, Lausanne, 2002)
The corrosion behaviour, transport properties and thermal stability of epoxy coatings electrodeposited on steel and steel modified by Zn-Co alloys were investigated during exposure to 3% NaCl solution. The electrochemical ...
Electrochemical deposition and characterization of zinc-nickel alloys deposited by direct and pulse current / Elektrohemijsko taloženje i karakterizacija legura cink-nikal dobijenih konstantnom i pulsirajućom strujom
(Serbian Chemical Society, Belgrade, 2002)
Chemical composition and phase structure of Zn-Ni alloys obtained by electrochemical deposition under various conditions were investigated. The alloys were deposited on a rotating disc electrode and steel panel from chloride ...
Microstructure and corrosion behaviour of Zn-Co alloys deposited from three different plating baths / Mikrostruktura i koroziono ponašanje Zn-Co legura taloženih iz sulfatnog i hloridnih rastvora
(Serbian Chemical Society, Belgrade, 2011)
The effects of plating baths of different composition on the micro- structure and corrosion stability of Zn-Co alloy coatings were studied. Zn-Co alloys with the same Co content were deposited from chloride plating baths ...
The electrochemical deposition and corrosion stability of Zn-Mn alloy coatings / Elektrohemijsko taloženje i koroziona stabilnost prevlaka Zn-Mn legura
(Engineering Society for Corrosion, Belgrade, Serbia, 2010)
The influence of the type of the deposition solution on the current efficiency during electrodeposition of Zn-Mn alloys was examined. The Zn-Mn alloys were deposited on steel from chloride, sulphate and pyrophosphate plating ...
Formation of Disperse Silver Deposits by the Electrodeposition Processes at High Overpotentials
(Esg, Belgrade, 2012)
In this study, electrodeposition of silver from nitrate solution at the high overpotentials was analyzed. Morphologies of silver deposits obtained at the different overpotentials and with the different electrodeposition ...
Electrodeposition and characterization of Fe-Mo alloys as cathodes for hydrogen evolution in the process of chlorate production / Elektrohemijsko taloženje i karakterizacija Fe-Mo legura kao katoda za reakciju izdvajanja vodonika u industrijskom procesu proizvodnje hlorata
(Serbian Chemical Society, Belgrade, 2005)
Fe–Mo alloys were electrodeposited from a pyrophosphate bath using a single diode rectified AC current. Their composition and morphology were investigated by SEM, optical microscopy and EDS, in order to determine the ...
Cross-section analysis of the morphology of electrodeposited copper obtained in the hydrogen co-deposition range / Morfologija poprečnog preseka prevlaka bakra dobijenih elektrohemijskim taloženjem u oblasti ko-depozicije vodonika
(Serbian Chemical Society, 2009)
Cross-section analysis of copper deposits electrodeposited in the hydrogen co-deposition range at a constant overpotential and in a pulsating overpotential (PO) regime was performed. It was shown that a complete structural ...
Protective properties of epoxy coatings electrodeposited on steel electrochemically modified by Zn-Ni alloys
(Elsevier Science Sa, Lausanne, 2004)
A review is given on Zn-Ni alloys electrochemically deposited on steel under various deposition conditions. The influence of deposition current density and type of deposition solution on the chemical content, phase structure ...
Corrosion behaviour of epoxy coatings investigated by EIS
(Trans Tech Publications Ltd, Durnten-Zurich, 1998)
Epoxy coatings were formed by cathodic electrodeposition of an epoxy resin on steel and on electrochemically modified steel surface by Fe-P alloy using constant voltage method (resin concentration 10 wt.%, temperature 26 ...