Претраживање
Приказ резултата 31-40 од 3386
Titanium coated with high-performance nanocrystalline ruthenium oxide synthesized by the microwave-assisted sol-gel procedure
(Springer, New York, 2016)
Ruthenium oxide coating on titanium was prepared by the sol-gel procedure from well-defined colloidal oxide dispersions synthesized by the microwave (MW)-assisted hydrothermal route under defined temperature and pressure ...
Synthesis and characterization of Pt nanocatalyst on Ru0.7Ti0.3O2 support as a cathode for fuel cells application
(Elsevier Science Sa, Lausanne, 2015)
Ruthenium oxide/titanium oxide, with a Ru:Ti atomic ratio of 7:3 was synthesized by modified sol-gel procedure and used as a support for platinum nanocatalyst for oxygen reduction reaction. The synthesized materials were ...
Influence of hemicelluloses and lignin content on structure and sorption properties of flax fibers (Linum usitatissimum L.)
(Springer, Dordrecht, 2018)
In this work, alkali and oxidative treatments were employed to obtain flax fibers with different content of hemicelluloses and lignin, in order to study the influence of chemical composition on structure and sorption ...
Hydrometallurgical process for extraction of metals from electronic waste, part II: Development of the processes for the recovery of copper from printed circuit boards (PCB)
(Savez inženjera metalurgije Srbije, Beograd, 2011)
Rapid technological development induces increase of generation of used electric and electronic equipment waste, causing a serious threat to the environment. Waste printed circuit boards (WPCBs), as the main component of ...
Investigation of the influential values about the use of the lead electrochemical system / Istraživanja uticajnih veličina na iskorišćenja olovnog elektrohemijskog sistema
(Društvo za sunčevu energiju "Srbija solar", Zrenjanin, 2010)
For the purpose of making a lead battery of the standard quality, characteristics of the exploitation depending on influential values, were tested: currents, temperatures and containing level of the antimony in electrode ...
Synthesis and characterization of porous tungsten carbide with added tungsten silicides
(Elsevier Sci Ltd, Oxford, 2018)
Porous materials made of commercial tungsten carbide (WC) with the addition of thermally obtained tungsten silicides (WSi2 and W5Si3) were made. The main research's contribution is firstly finding optimal conditions for ...
Application of an integrated supercritical extraction and impregnation process for incorporation of thyme extracts into different carriers
(Handbook on Supercritical Fluids: Fundamentals, Properties and Applications, 2014)
Supercritical carbon dioxide (sc2) is known as a good solvent for a wide range of bioactive compounds from natural sources. Extraction of bioactive compounds from plant material using sc2 is a favorable technique for ...
Sorption of Cu2+ and Co2+ from aqueous solutions onto sepiolite: An equilibrium, kinetic and thermodynamic study / Sorpcija jona bakra i kobalta iz vodenih rastvora na sepiolitu, ispitivanje ravnoteže, kinetike i termodinamike sorpcije
(Serbian Chemical Society, Belgrade, 2011)
The efficiency of natural sepiolite for the removal of Cu2+ and Co2+ from aqueous solution was determined using the batch method. The sorption experiments were performed as a function of the initial metal concentration, ...
Moisture absorption capacity of polyamide 6,6 fabrics surface functionalised by chitosan-based hydrogel finishes
(Elsevier Science Sa, Lausanne, 2011)
The present study aims at investigating the moisture absorption capacity of polyamide 6,6 fabrics when their surface is functionalised by chitosan-based hydrogels. For the finishing procedure, bulk hydrogels of chitosan ...
Combustion of Metallurgical Wastes Using Secondary Aluminum Foils
(Taylor & Francis Inc, Philadelphia, 2017)
Simulating the reactions in a complex system can lead to self-sustaining and energy efficient treatment of wastes in recycling promoting manner. In this contribution, the synergic combination of electric arc furnace dust ...