Pretraživanje
Prikaz rezultata 61-70 od 164
Optimal conditions of vacuum distillation process for obtaining the high grade pure magnesium / Optimalni uslovi porcesa vakuumske destilacije za dobijanje magnezijuma visoke čistoće
(Savez inženjera i tehničara Srbije, Beograd, 2014)
In this paper the procedure of obtaining of high purity magnesium by using the vacuum distillation process has been shown. Vacuum distillation process has been conducted under low and high vacuum at different operating ...
Influence of characteristics of particles and fluid on gas-liquid oxygen mass transfer and bubble distribution in three-phase system / Uticaj karakteristika čestica i fluida na prenos mase kiseonika iz gasne u tečnu fazu i distribuciju mehurova u trofaznom sistemu
(Udruženje za tehnologiju vode i sanitarno inžinjerstvo, Beograd, 2013)
This paper presents the study of bubble distribution and volumetric mass transfer coefficient, kLa, in a three-phase system with spherical particles of glass and ceramic and non-spherical particles of ceramic and zeolite. ...
Mogućnosti primene sorbenata aktiviranih jonima metala za mikrobiološko precišćavanje vode
(Naučno-stručno društvo za zaštitu životne sredine Srbije - Ecologica, Beograd, 2014)
Analysis of copper losses throughout weak acid effluent flows generated during off-gas treatment in the new copper smelter RTB Bor
(Association of Metallurgical Engineers of Serbia, 2013)
The previous inadequate treatment of off-gas in RTB Bor in Serbia has resulted in serious pollution of the environment and the possibly high losses of copper through the effluent flows. The project of New Copper Smelter ...
Contamination of cakes with toxigenic molds / Kontaminacija poslastičarskih proizvoda toksigenim plesnima
(Matica Srpska, 2013)
The total number of molds in cakes ranged up to 9.0 x 102 CFU/g. The highest number of molds was isolated on Dichloran 18% Glycerol Agar (DG18), and the lowest on Malt Yeast Extract 50% Glucose Agar (MY50G). Mycopopulation ...
Evaluation of the residue of lactic acid fermentation on stillage as an animal feed / Ispitivanje kvaliteta džibre nakon mlečno-kiselinske fermentacije kao hrane za životinje
(Nacionalno društvo za procesnu tehniku i energetiku u poljoprivredi, Novi Sad, 2013)
Lactic acid is a significant chemical for the food industry. Fermentative lactic acid production on wastes could significantly improve the economy and sustainability of the process. In this study, lactic acid production ...
Inhibitory activity of the onion essential oil on growth Cladosporium cladosporioides, Emericella nidulans, and Eurotium spp. / Inhibitorska aktivnost etarskog ulja crnog luka na rast Cladosporium cladosporioides, Emericella nidulans, i Eurotium spp.
(Nacionalno društvo za procesnu tehniku i energetiku u poljoprivredi, Novi Sad, 2013)
This study was aimed at investigating the antifungal potential of onion (Allium cepa L. cultivar Kupusinski jabučar) essential oil against Cladosporium cladosporioides, Emericella nidulans, and Eurotium spp. isolated from ...
Avoidance of tunnel type defect in FSW welded Al 5052-H32 plates / Eliminacija tunela pri zavarivanju trenjem alatom legure Al 5052-H32
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, 2012)
Some experiences in elimination of tunnel type defect Friction Stir Welding of Al alloy 5052-H32 are presented in this paper. In order to evaluate the influence of the processing parameter (ratio between rotation and ...
Secondary measures for reduction of NOx emission in glass melting process / Sekundarni postupci smanjenja emisije oksida azota u procesu topljenja stakla
(Savez inženjera i tehničara Srbije, Beograd, 2012)
In this paper the new methods for reduction of NOx emission from glass melting furnaces were presented. The secondary measures are focused on development of different methods for elimination of nitrogen oxide from the smoke ...
Dynamic mechanical properties of aramid fabrics impregnated with carbon nanotube/poly (vinyl butyral)/ethanol solution
(Association of Metallurgical Engineers of Serbia, 2013)
In this study six samples of polyurethane/p-aramid multiaxial fabric forms (Colon fabrics) were coated with 10 wt.% poly (vinyl butyral) (PVB)/ethanol solution with the addition of multiwalled carbon nanotubes (MWCNT). The ...