Претраживање
Приказ резултата 61-69 од 69
Electrochemistry towards excellence (ISE 2020): Foreword
(Elsevier, 2022)
In spite of the long tradition that electrochemical science hashad in the Republic of Serbia, the 71st Annual Meeting (AM) of theInternational Society of Electrochemistry (ISE) was the first timeSerbia was supposed to be ...
Analysis of metal ion release from biomedical implants
(Association of Metallurgical Engineers of Serbia, 2013)
Metallic biomaterials are commonly used for fixation or replacement of damaged bones in the human body due to their good combination of mechanical properties. The disadvantage of metals as implant materials is their ...
Effect of alumina coatings on corrosion behavior of X10CrAlSi7 steel in sulfuric acid
(Belgrade : Association of Metallurgical Engineers of Serbia (AMES), 2019)
The results of experimental studies of the effect of the plasma sprayed alumina coating on the improved corrosion resistance of the heat-resistant ferritic
stainless steel (W.Nr. 1.4713, EN X10CrAlSi7) in the sulfuric ...
Electrochemical synthesis and corrosion behavior of thin polyaniline film on mild steel, copper and aluminum
(Belgrade : Association of the Chemical Engineers of Serbia, 2011)
The electrochemical synthesis of polyaniline (PANI) on mild steel, aluminum and copper from the sodium benzoate solutions has been investigated. It has been shown that thin, highly adherent, polyaniline films on the ...
Black Pine (Pinus nigra) Essential Oil as a Green Corrosion Inhibitor for Carbon Steel
(MDPI, 2023)
In this work, the essential oil of black pine (Pinus nigra J. F. Arnold) was used for the first time as a natural, ecological, and sustainable corrosion inhibitor for the acid cleaning of carbon steel. The essential oil ...
Numerical simulation of fatigue crack growth in Ti-Al6-V4 hip implants under different exploitation conditions
(Elsevier B.V., 2023)
One of the most important aspects of materials typically used in biomedical engineering is their resistance to various unfavourable exploitation conditions, which greatly impact their work life. In terms of extreme conditions, ...
The Influence of Sm Content on the Surface Morphology and Corrosion Behavior of Zn-Co-Sm Composite Coatings
(MDPI, 2023)
The influence of samarium, as an additional alloying element, on the morphology and corrosion performance of the Zn-Co-Sm alloy electrodeposited coatings, was investigated by scanning electron microscopy coupled with energy ...
Zn-Co-CeO2 vs. Zn-Co Coatings: Effect of CeO2 Sol in the Enhancement of the Corrosion Performance of Electrodeposited Composite Coatings
(Metals, 2021)
Electrodeposition and characterization of novel ceria-doped Zn-Co composite coatings was the main goal of this research. Electrodeposited composite coatings were compared to pure Zn-Co coatings obtained under the same ...
Supplementary material for the article: Radojković, B.; Pejić, J.; Marunkić, D.; Simović, A.; Pantović, S. E.; Jegdić, B.; Bajat, J. Corrosion of Metal Parts in the Power Plant. Materials & Corrosion 2023. https://doi.org/10.1002/maco.202313919
(John Wiley and Sons Inc., 2023)
The AISI 304 (X5CrNi19-10) stainless steel is widely used for the production of various metal parts in power plants. A procedure for testing the influence of the dust from a power plant on resistance to general and pitting ...