Pretraživanje
Prikaz rezultata 71-78 od 78
Influence of compression speed and deformation percentage on mechanical properties of calcium alginate particles / Uticaj brzine kompresije i procenta deformacije na mehaničke karakteristike kalcijum alginatnih čestica
(Association of the Chemical Engineers of Serbia, 2015)
Hydrogel particles are often used as carriers for the immobilization of enzymes, polyphenolic antioxidants, whole microbial, plant or mammalian cells. In many processes, the mechanical properties of alginate particles are ...
Development of Coated Electrodes with Solid Wire and Flux-Cored Alloyed Wire for Microalloyed Steel Welding
(MDPI, Basel, 2020)
In this paper, we will present our investigation of the quality of J55 microalloyed steel welds that were formed by a basic flux-cored wire electrodes that were of appropriate quality and alloyed with Ni and Mo. Based on ...
Mechanical properties of acrylate matrix composite reinforced with manganese-aluminum layered double hydroxide
(John Wiley and Sons Inc., 2023)
Acrylate polymers are used in several applications such as dentistry, medicine, and industry. The modification of their properties using the reinforcement is of key importance for the possible applications. Layered double ...
Design of halloysite modification for improvement of mechanical properties of the epoxy based nanocomposites
(Polymer Composites, 2021)
In this study, halloysite nanotubes (HNT) were modified by: 3-glycidyloxypropyltrimethoxysilane (GLYMO), 3-aminopropyltrimethoxysilane (APTES), and 2,2-Bis[4-(glycidyloxy) phenyl] propane (DGEBA), and incorporated in the ...
Proučavanje uticaja metalnih vlakana na neka svojstva tehničkih pređa / Investigation of influence of metallic fibers on some properties of technical yarns
(Savez hemičara i tehnologa Srbije, 2000)
Ispitivana su neka mehanička i elektrofizička svojstva pređa formiranih od mešavine pamučnih i metalnih vlakana. Rezultati su upoređeni sa rezultatima dobijenim za pamučne pređe iste finoće. Registrovano je smanjenje ...
Synthesis and characterization of semi-interpenetrating networks of chitosan and poly(N-vinyl-2-pyrrolidone) / Sinteza i karakterizacija semi-interpenetrirajućih mreža hitozana i poli(N-vinil-2-pirolidona)
(Association of Chemical Engineers of Serbia, 2010)
Semi-interpenetrating networks (semi-IPNs) based on chitosan and poly(N-vinyl-2-pyrrolidone) were prepared in order to achieve better mechanical properties. The samples were characterized by FTIR, SEM, DMA analysis and the ...
Age hardening potential of an Al-4.6 wt.% Mg alloy with Cu addition
(Belgrade : Institute of Technical Sciences of SASA, 2010)
The ageing behavior of an Al-4.6Mg-0.54Cu (in wt.%) alloy was studied after: (i) solution
treatment for 1h at 530°C, and (ii) annealing at 280°C for 3h. Both groups of the heat treated
specimens underwent further ...
Reuse potential of functionalized thermoplastic waste as reinforcement for thermoset polymers: Mechanical properties and erosion resistance
(SAGE Publications Ltd., 2021)
Two types of polymer waste materials, poly(ethylene terephthalate) (PET) and polycarbonate based Colombian Resin (CR-39), were used for the designing of fully recycled composite materials. Waste PET was employed for the ...