Приказ основних података о документу
The influence of thermomechanical treatment and chemical composition on recrystallization of Al-Mg alloys
dc.creator | Radović, Ljubica | |
dc.creator | Nikačević, M. | |
dc.creator | Popović, Miljana | |
dc.creator | Romhanji, Endre | |
dc.date.accessioned | 2021-03-10T10:40:49Z | |
dc.date.available | 2021-03-10T10:40:49Z | |
dc.date.issued | 2007 | |
dc.identifier.issn | 0354-6306 | |
dc.identifier.uri | http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1051 | |
dc.description.abstract | Recrystallization behaviour of AlMg3, AlMg4.5Mn and AlMg6Mn alloy plates subjected to different thermomechanical treatments (TMTs), has been studied by means of optical microscopy and hardness measurements. Applied two-stage annealing at 565°C/6h + 450°C/4h simulated homogenization and heterogenization processes, respectively, and was followed by cold rolling with 20, 40 and 60%. Final annealing was performed for 3h at 250, 280 and 350°C, with slow and rapid heating rates (0.6 and 25°C/min). Increase of rolling reduction and temperature, either individually or in combination, promotes recrystallization during final annealing. The recrystallization process was found non-simply related to the chemical composition, but a rather complex recrystallization behaviour of these alloys is attributed to the effect of the size and distribution of the second phase particles formed during the thermomechanical treatment. . | en |
dc.publisher | Savez inženjera metalurgije Srbije, Beograd | |
dc.rights | openAccess | |
dc.source | Metalurgija | |
dc.subject | Al-Mg alloys | en |
dc.subject | chemical composition | en |
dc.subject | cold deformation | en |
dc.subject | recovery | en |
dc.subject | heating rate | en |
dc.subject | recrystallization | en |
dc.title | The influence of thermomechanical treatment and chemical composition on recrystallization of Al-Mg alloys | en |
dc.type | article | |
dc.rights.license | ARR | |
dc.citation.epage | 267 | |
dc.citation.issue | 4 | |
dc.citation.other | 13(4): 259-267 | |
dc.citation.spage | 259 | |
dc.citation.volume | 13 | |
dc.identifier.fulltext | http://TechnoRep.tmf.bg.ac.rs/bitstream/id/10860/bitstream_10860.pdf | |
dc.identifier.rcub | https://hdl.handle.net/21.15107/rcub_technorep_1051 | |
dc.type.version | publishedVersion |