Претраживање
Приказ резултата 11-20 од 52
The Thermophysical Properties of Primary Phase in Lithium Germanium Phosphate Glass
(Science of Sintering, 2021)
The selected lithium germanium-phosphate glass was prepared by a conventional melt-quenching technique. The XRD method was employed to confirm the glass was obtained and to reveal crystalline phases during heat treatment. ...
Development of the automated software and device for determination of wicking in textiles using open-source tools
(Public Library Science, San Francisco, 2020)
The development of automated software and the device for determination of wicking of textile materials, using open-source ImageJ libraries for image processing, and newly designed additional algorithm for the determination ...
Computer-Aided Nonlinear Frequency Response Method for Investigating the Dynamics of Chemical Engineering Systems
(MDPI, Basel, 2020)
The Nonlinear Frequency Response (NFR) method is a useful Process Systems Engineering tool for developing experimental techniques and periodic processes that exploit the system nonlinearity. The basic and most time-consuming ...
Ceria Particles as Efficient Dopant in the Electrodeposition of Zn-Co-CeO2 Composite Coatings with Enhanced Corrosion Resistance: The Effect of Current Density and Particle Concentration
(Molecules, 2021)
Novel Zn-Co-CeO2 protective composite coatings were deposited successfully from chloride plating solutions. Two different types of ceria sources were used and compared: commercial ceria powder and home-made ceria sol. ...
Optimization of Methanol Synthesis under Forced Periodic Operation
(Processes, 2021)
Traditionally, methanol is produced in large amounts from synthesis gas with heterogeneous Cu/ZnO/Al2O3 catalysts under steady state conditions. In this paper, the potential of alternative forced periodic operation modes ...
Adsorption of Anthraquinone Dye AB111 from Aqueous Solution using Synthesized Alumina-Iron Oxide Doped Particles
(Science of Sintering, 2021)
Adsorption of anthraquinone dye Acid Blue 111 by alumina-iron oxide doped particles prepared by sol-gel method from aqueous solutions was studied. The adsorbent morphology was revealed by FESEM and the crystallographic ...
Prospect of Polysaccharide-Based Materials as Advanced Food Packaging
(MDPI, Basel, 2020)
The use of polysaccharide-based materials presents an eco-friendly technological solution, by reducing dependence on fossil resources while reducing a product's carbon footprint, when compared to conventional plastic ...
Unveiling a Recycling-Sourced Mineral-Biocellulose Fibre Composite for Use in Combustion-Generated NOx Mitigation Forming Plant Nutrient: Meeting Sustainability Development Goals in the Circular Economy
(MDPI, Basel, 2020)
Featured Application Surface flow filter for sorption of NOx in city/industrial pollution and conversion into a plant nutrient. Abstract NOx is unavoidably emitted during combustion in air at high temperature and/or pressure, ...
Evaluation of Adsorption Performance and Quantum Chemical Modeling of Pesticides Removal using Cell-MG Hybrid Adsorbent
(Science of Sintering, 2021)
Magnetite (MG) modified cellulose membrane (Cell-MG), obtained by reaction of 3-aminosilane and subsequently with diethylenetriaminepentaacetic acid dianhydride functionalized waste Cell fibers (Cell-NH2 and Cell-DTPA, ...
Thermodynamic and transport properties of biomass-derived furfural, furfuryl alcohol and their mixtures
(MDPI, 2021)
The limited reserves and well-known disadvantages of using fossil energy sources have increased the need for appropriate renewable substitutes in the production of various chemicals and materials. Biomass has been shown ...