Pretraživanje
Prikaz rezultata 31-40 od 42
Age hardening potential of an Al-4.6 wt.% Mg alloy with Cu addition
(Belgrade : Institute of Technical Sciences of SASA, 2010)
The ageing behavior of an Al-4.6Mg-0.54Cu (in wt.%) alloy was studied after: (i) solution
treatment for 1h at 530°C, and (ii) annealing at 280°C for 3h. Both groups of the heat treated
specimens underwent further ...
Selection of strains from Lactobacillus sp. for lactic acid fermentation of thin stillage
(Технолошко-металуршки факултет, Београд, 2010)
Bioethanol produced by fermentation of biomass, such as sugar, starch, or lignocellulosic materials, is one of the most important renewable energy resources today. Beside the bioethanol, considerable amounts of by-products ...
On the removal of aqueous manganese, nickel and zinc ions using the natural clinoptilolite
(University of Nova Gorica, Slovenia, 2010)
Primena džibre tritikalea za proizvodnju mlečne kiseline / Triticale stillage appliance for lactic acid production
(Beograd : Tehnološko-metalurški fakultet Univerziteta, 2010)
Triticale is a very applicable crop for bioethanol production, and also provides a stillage that can be used as a feed. The main aim of this research was to investigate the possibility of transformation of unused stillage ...
Production of lactic acid from corn thin stillage using Lactobacillus rhamnosus ATCC 7469
(Технолошко-металуршки факултет, Београд, 2010)
The lactic acid production from corn thin stillage using Lactobacillus rhamnosus ATCC 7469 in a batch system was studied. The fermentation temperature was optimized taking into account lactic acid production and glucose ...
Kompresiona svojstva PES tkanine modifikovane RF plazmom i TiO2 nanočesticama
(Srpsko hemijsko društvo, 2010)
Application of a Structural Integrity Assessment Software
(3rd International Multi-Conference on Engineering and Technological Innovation, IMETI 2010, 2010)
In this paper, a brief overview is given of two projects concerning structural integrity assessment, including on-line software based on SINTAP procedure. An example of the software usage is presented, and the obtained ...
Local approach to analysis of ductile fracture in welded joints-Influence factors
(18th European Conference on Fracture: Fracture of Materials and Structures from Micro to Macro Scale, ECF 2010, 2010)
Local approach is applied to analysis of ductile fracture in steel welded joints. Welded single-edge notched bend (SENBspecimens with joints containing one or two weld metals are investigated. The Gurson plastic flow ...
Microwave-assisted extraction and high performance liquid chromatography as a rapid method for mothproofing agents analysis
(Book of Abstracts / International Conference, Extraction of the organic compounds, ICEOC-2010, Voronezh, Russia, September 20-24, 2010, 2010)
Improvement of bioethanol production from corn by ultrasound and microwave pretreatments
(19th International Congress of Chemical and Process Engineering, CHISA 2010 and 7th European Congress of Chemical Engineering, ECCE-7, 2010)
Bioethanol production by simultaneous saccharification and fermentation (SSF) of cornmeal using Saccharomyces cerevisiae var. ellipsoideus yeast in a batch system with prior ultrasound or microwave treatment was studied. ...