Претраживање
Приказ резултата 1-10 од 87
Quantification of viable spray-dried potential probiotic lactobacilli using real-time PCR
(Srpsko biološko društvo, Beograd, i dr., 2012)
The basic requirement for probiotic bacteria to be able to perform expected positive effects is to be alive. Therefore, appropriate quantification methods are crucial. Bacterial quantification based on nucleic acid detection ...
Premazi na bazi cirkona sa primenom u Lost Foam procesu livenja / Zircon-based coating for the applications in Lost Foam casting process
(Savez hemijskih inženjera, Beograd, 2012)
U ovom radu je istraživana mogućnost dobijanja novih vatrostalnih premaza na bazi cirkona koji bi imali primenu u livarstvu. Optimizacija sastava premaza kontrolisana reološkim svojstvima postignuta je primenom različitih ...
Experimental and numerical analysis of local mechanical properties of globe valve housing
(Chemicke Listy, 2012)
Experimental and Numerical Analysis of Local Mechanical Properties of Globe Valve Housing One of the most widely used industrial valves is globe valve. Due to wide industrial application, the valve is subjected to various ...
Effects of additives on nickel (ii)-chloride hydrogen reduction for production of nanocomposite catalysts
(Editura Stiintifica Fmr, Bucharest, 2012)
Catalysts based on nickel, as active component, exhibit suitable properties in various heterogeneous catalysis processes; however, they quickly deactivate due to deposits formation during exploitation and sintering at ...
Electrical Conductivity of Lignocellulose Composites Loaded with Electrodeposited Copper Powders. Part II. Influence of Particle Size on Percolation Threshold
(Esg, Belgrade, 2012)
This article is concerned with synthesis and characterization of electroconductive composite materials prepared by the compression molding of mixtures of lignocellulose and electrochemically deposited copper powder under ...
Formation of Disperse Silver Deposits by the Electrodeposition Processes at High Overpotentials
(Esg, Belgrade, 2012)
In this study, electrodeposition of silver from nitrate solution at the high overpotentials was analyzed. Morphologies of silver deposits obtained at the different overpotentials and with the different electrodeposition ...
Electrophoretic deposition of alumina and boehmite coatings on metal surfaces
(Soc Chemists Technologists Madeconia, Skopje, 2012)
Electrophoretic deposition (EDP) is gaining increasing attention both in science and industry, due to novel applications in the processing of advanced ceramic materials and ceramic coatings. Electrophoretic deposition has ...
Analytical model of CNT FET current-voltage characteristics
(Natl Inst Optoelectronics, Bucharest-Magurele, 2012)
In this paper, one of the most promising electron devices - carbon nanotube field effect transistor (CNT FET) is investigated. At the beginning, the carbon nanotube properties are presented. The main contribution of this ...
Characterization of microstructure and properties of hypereutectic al18wt%si alloys reinforced by 10%sic alloy
(Editura Stiintifica Fmr, Bucharest, 2012)
The aim of this work was to test the influence of various process parameters to obtain composite materials based on the Al18Wt%Si alloy with addition of 10Wt%SiC.For a comparative analysis purposes, the samples obtained ...
Relationship between the calculated oxygen activity and the sulfur partition ratio for cao-al2o3-sio2-mgo slag during ladle refining
(Institute of Metals and Technology, 2012)
A slag-metal equilibrium study was carried out to investigate the effect of oxygen activity on the sulfur partition for CaO-Al2O3-SiO2-MgO slag. The sulfide capacity C-s prediction models by Sosinsky-Sommerville based on ...