Претраживање
Приказ резултата 321-330 од 346
Experimental laboratory for development of fillers and auxiliary materials for welding and soldering / Eksperimentalna laboratorija za razvoj dodatnih i pomoćnih materijala za zavarivanje i lemljenje
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, 2013)
The development of new materials and their use in construction of modern devices and structures requires the development of fillers and auxiliary materials for their joining. Development and mastering of production of ...
Effect of the pH of artificial saliva on ion release from commercially pure titanium / Uticaj pH vrednosti veštačke pljuvačke na otpuštanje jona iz komercijalno čistog titana
(Faculty of Technology, Novi Sad, 2013)
Due to their excellent characteristics, such as chemical inertness, mechanical resistance, low Young's modulus, high corrosion resistance, and outstanding biocompatibility, titanium and its alloys are the most used metallic ...
Arsenic Removal from Water Using Industrial By-Products
(Hindawi Limited, 2013)
In this study, removal of arsenic ions using two industrial by-products as adsorbents is represented. Removal of As(III) and As(V) from water was carried out with industrial by-products: residual from the groundwater ...
Application of chromite in the production of refractory coatings
(Verlag Schmidt GmbH, 2013)
This work investigated the possibility of developing new chromite-based refractory coatings for hot metal casting applications. The coating composition and rheological properties were optimized by careful choice of binding ...
A new insight into the mechanism of lead electrodeposition: Ohmic-diffusion control of the electrodeposition process
(Elsevier, 2013)
A new insight into the mechanism of lead electrodeposition from nitrate solutions is presented by analysis of the polarization characteristics and by scanning electron microscopic (SEM) analysis of the surface morphology ...
PROIZVODNJA FERMENTISANOG NAPITKA OD SURUTKE I MLEKA
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2013)
Surutka je tečni sporedni proizvod koji u velikim količinama zaostaje nakon
proizvodnje sira i kazeina. U zavisnosti od vrste sira koji se proizvodi, zapremina
obrazovane surutke može da se kreće i do 90l na 100l korišćenog ...
Određivanje anizomicina u životinjskim tkivima
(Beograd : Srpsko hemijsko društvo, 2013)
Anizomicin je antibiotik izolovan iz bakterijske vrste Streptomyces griseolus za koji je nekoliko studija pokazalo da je citotoksičan prema ćelijama malignog tu-mora, tj. da može suzbiti njihov rast. Cilj ovog rada bio je ...
Sensitivity analysis of mathematical models for final product properties: Link to DTG curve
(Elsevier Sci Ltd, Oxford, 2013)
Compressive strength and water absorption of fired heavy clay products varies with firing temperatures, but not entirely according to linear function, as it is mostly reported in literature. Also, differential thermo-gravimetric ...
Synthesizing a new type of mullite lining
(Inst Za Kovinske Materiale I In Tehnologie, Ljubjana, 2013)
Various possibilities for developing new mullite-based refractory linings that can be applied in a casting process were investigated and are presented in this paper. An optimization of the refractory-lining composition ...
Corrosion resistance of welded pipe in oil wells / Otpornost na koroziju zavarenih cevi u naftnim bušotinama
(Engineering Society for Corrosion, Belgrade, Serbia, 2013)
Steel pipes in oil and gas wells are continuously exposed to the process of corrosion-assisted elevated temperatures and pressures prevailing in the interior of the tube. Corrosion can lead to significant reduction of ...