Претраживање
Приказ резултата 1-10 од 317
The effect of false-twist texturing parameters on the structure and crimp properties of polyester yarn
(Savez hemijskih inženjera, Beograd, 2017)
In this paper, the effect of false-twist texturing parameters (texturing speed, heater temperature, draw ratio and disc-to-yarn speed ratio (D/Y ratio)) on the structure and crimp properties of polyester yarn has been ...
Influence of the synthesis parameters on the properties of the sepiolite-based magnetic adsorbents
(Elsevier Science Bv, Amsterdam, 2017)
The magnetic nanocomposites (MNCs), used as adsorbents for Cd2+ ions, were prepared by a co-precipitation method using both the untreated natural (SEP) and the partially acid-activated (ASEP) sepiolites as supports for ...
Combustion of Metallurgical Wastes Using Secondary Aluminum Foils
(Taylor & Francis Inc, Philadelphia, 2017)
Simulating the reactions in a complex system can lead to self-sustaining and energy efficient treatment of wastes in recycling promoting manner. In this contribution, the synergic combination of electric arc furnace dust ...
Hardness response and adhesion of thin copper films on alloy substrates
(Belgrade: ETRAN – Society for electronics, telecommunication, computing, automatics and nuclear engineering, 2017)
Microhardness test is the most commonly used method for assessing the mechanical properties of thin films.This testing method uses controlled contact at a single point of an indenter and chosen material which induces the ...
TEMPO-oxidized cotton as a substrate for trypsin immobilization: impact of functional groups on proteolytic activity and stability
(Springer, Dordrecht, 2017)
Cotton fibers containing different amounts of aldehyde and carboxyl groups were prepared by varying TEMPO oxidation conditions and then employed as carriers for trypsin immobilization. Depending on the functional group ...
Optimization of Active Carbonaceous Material Obtained by Low Hydrothermal Carbonization of Plane Tree Seed with H3PO4
(Trans Tech Publications Ltd, Durnten-Zurich, 2017)
Activated carbons (ACs) were successfully prepared using plane tree seed (PTS) as a cheap and renewable raw material. The plane tree seeds were firstly treated combining magnetic (MM) and ultrasonic mixing (USM) during ...
One-step synthesis of NIR-responsive NaYF4:Yb,Er"Chitosane nanoparticles for biomedical application
(Belgrade : Institute of Physics Belgrade, 2017)
There is a great technological interest in synthesis of lanthanide doped upconverting nanoparticles with specific morphological characteristics and efficient luminescence response suitable for biomedical use [1]. A ...
Oxidized pentacene micro-rods obtained by thermal annealing of pentacene thin films in air
(Pergamon-Elsevier Science Ltd, Oxford, 2017)
Prolonged annealing of pentacene thin films in air leads to the formation of nano- and micro-scale rod-shaped structures at temperatures equal to or higher than 130 degrees C. Scanning electron microscopy measurements ...
Determination of Degradation Level during Cavitation Erosion of Zircon Based Ceramic
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2017)
Mechanical shock of zircon based ceramic induced by cavitation erosion testing was investigated in this study. Several parameters were followed in order to determine level of material degradation during the cavitation ...
Synthesis, characterization and biological activity of 2-(5-arylidene-2,4-dioxotetrahydrothiazole-3-yl) propanoic acid derivatives
(Elsevier Science Bv, Amsterdam, 2017)
A series of six novel 2-(5-arylidene-2,4-dioxotetrahydrothiazole-3-yl) propanoic acids and six corresponding methyl esters were synthesized. All compounds were characterized by melting points, elemental analysis, FT-IR, ...