Pretraživanje
Prikaz rezultata 11-20 od 56
Physical-mechanical and microstructural properties of alkali-activated fly ash-blast furnace slag blends
(Elsevier Sci Ltd, Oxford, 2015)
This paper investigated physical mechanical and microstructural properties of alkali-activated binders based on blends of fly ash (FA) and blast furnace slag (BFS). FA BFS blends were alkali-activated with sodium silicate ...
Phase transformation in cordierite gel synthesized by non-hydrolytic sol-gel route
(Elsevier Sci Ltd, Oxford, 2007)
Cordierite gel was synthesized by non-hydrolytic sol-gel route, starting from aluminum chloride, TEOS and magnesium chloride dissolved in absolute ethanol. Crystallization of p.-cordierite from gel at temperatures between ...
Crystallization behavior and sintering of cordierite synthesized by an aqueous sol-gel route
(Elsevier Sci Ltd, Oxford, 2012)
The purpose of the research was to investigate crystallization behavior and sintering of cordierite synthesized by a low-price aqueous sol gel route starting from silicic acid and magnesium and aluminum salts. Viscous ...
Conventional and spark-plasma sintering of cordierite powders synthesized by sol-gel methods
(Elsevier Sci Ltd, Oxford, 2013)
Cordierite powders synthesized by colloidal and alkoxide sol-gel methods were conventionally and spark-plasma sintered. The powders for the sintering investigations were obtained by calcination of the gels at a temperature ...
Carboxylic acids and polyethylene glycol assisted synthesis of nanocrystalline nickel ferrites
(Elsevier Sci Ltd, Oxford, 2013)
Different synthesis methods for the preparation of nanocrystalline nickel ferrites are reported: the thermal decomposition of precursors, made of: (i) metal-nitrate salts with carboxylic acids (citric, malonic and tartaric), ...
Polycrystalline (Y0.7Gd0.3)(2)O-3:Eu3+ ceramics fabricated by Spark Plasma Sintering: Densification and microstructure development
(Elsevier Sci Ltd, Oxford, 2014)
Using Spark Plasma Sintering it is possible to produce polycrystalline ceramics of very fine microstructure and good mechanical properties. This work presents the fabrication of such ceramics using Eu3+-doped (Y0.7Gd0.3)(2)O-3 ...
Enhanced thermo-mechanical properties of acrylic resin reinforced with silanized alumina whiskers
(Elsevier Sci Ltd, Oxford, 2016)
The acrylic resin reinforced with silanized alumina whiskers with self-healing (SH) agents was synthesized. The self-healing system consisted of microcapsules with the healing agent dicyclopentadiene (DCPD) and modified ...
Spark plasma sintering of ZrC-SiC ceramics with LiYO2 additive
(Elsevier Sci Ltd, Oxford, 2013)
Spark plasma sintering (SPS) of ZrC-SiC composite powders in the presence of LiYO2 sintering additive was studied. The starting powders were obtained by a carbothermal reduction (CTR) of natural mineral zircon (ZrSiO4), ...
Preparation of low cost alumina nanofibers via electrospinning of aluminium chloride hydroxide/poly (vinyl alcohol) solution
(Elsevier Sci Ltd, Oxford, 2013)
Alumina nanofibers are very suitable materials for use as reinforcement in a great variety of high performance composite materials. Nanosized alumina fibers were prepared from the aluminum chloride hydroxide/poly (vinyl ...
Crystallization and sinterability of glass-ceramics in the system La2O3-SrO-B2O3
(Elsevier Sci Ltd, Oxford, 2014)
Glasses with a constant B2O3 and an increasing La2O3 content in the system La2O3-SrO-B2O3 were obtained by the usual melt quenching procedure. The crystallization and sinterability of the glasses were investigated by hot ...