Претраживање
Приказ резултата 1-10 од 56
Sensitivity analysis of mathematical models for final product properties: Link to DTG curve
(Elsevier Sci Ltd, Oxford, 2013)
Compressive strength and water absorption of fired heavy clay products varies with firing temperatures, but not entirely according to linear function, as it is mostly reported in literature. Also, differential thermo-gravimetric ...
Prediction and fuzzy synthetic optimization of process parameters in heavy clay brick production
(Elsevier Sci Ltd, Oxford, 2013)
Many factors influence final clay brick properties, since the raw materials used are highly heterogeneous. Statistical analysis is rarely used, according to literature, but it would improve understanding of the overall ...
Cyclic oxidation of Ti3Al-based materials
(Ceramics International, 2019)
The microstructure variation and oxidation behavior of a hot-rolled and quenched Ti-24Al-11Nb (at%) intermetallic alloy with and without protective Ni-20Cr (at%) coating were studied in the air at a cyclic annealing ...
Microstructure of LaNiO3 thin films obtained by the spin-on technique from citrate precursors
(Elsevier Sci Ltd, Oxford, 2008)
The morphology of perovskite LaNiO3 (LNO) thin films is a very important feature considering the fact that they could be used as an electrode material in ferroelectric devices. In this work, LNO films were prepared from ...
alpha-Tricalcium phosphate/fluorapatite based composite cements: Synthesis, mechanical properties, and biocompatibility
(Elsevier Sci Ltd, Oxford, 2020)
Composite cements based on alpha-tricalcium phosphate (alpha-TCP) and nanostructured fluorapatite (FAp), alpha-TCP/FAp, appropriate for dental usage as root canal filling material, have been prepared with the improved ...
C-doped TiO2 nanotubes with pulsed laser deposited Bi2O3 films for photovoltaic application
(Ceramics International, 2022)
Anodization was used to obtain a nanotubular TiO2 photoanode on F-SnO2 glass. Subsequent annealing in the CH4 atmosphere promoted the C-doping and improved the crystallinity of the TiO2 nanotubes. The pulsed laser deposition ...
Synthesis and characterization of Cr3+ doped TiO2 nanometric powders
(Elsevier, 2016)
Simple route was used for synthesis of nanostructured titania samples doped with 3 and 6 mol% of Cr3+ Titanium(IV)-isopropoxide and water were used as starting materials and as an agents for controlling hydrolysis and ...
Estimate of Si3N4 diffusion into Cu based filler metal
(Elsevier Science Ltd, 2000)
The diffusion phenomena occurring at the boundary between Si3N4 and active Cu based filler metal during Si3Nn/metal joining are discussed as a part of the general theory of reaction layer growth. The mechanism of reaction ...
Behavior of silicon carbide/cordierite composite material after cyclic thermal shock
(Elsevier Sci Ltd, Oxford, 2009)
In the present work Mg-exchanged zeolite and silicon carbide were used as starting materials for obtaining cordierite/SiC composite ceramics with weight ratio 30:70. Samples were exposed to the water quench test from 950 ...
Thermal shock damage characterization of refractory composites
(Elsevier Sci Ltd, Oxford, 2008)
The possibility of using dolomite and bauxite for synthesis of high temperature castable was studied. Behavior of the material in conditions of rapid temperature changes was investigated. Water quench test was applied to ...