Претраживање
Приказ резултата 21-30 од 31
Core-shell superparamagnetic iron oxide nanoparticle (SPION) clusters: TEM micrograph analysis, particle design and shape analysis
(Elsevier, 2016)
For the first time, particle shape analysis of silica coated iron oxide (maghemite/magnetite) nanoparticle clusters (core-shell nanostructures) is discussed using computational methods. We analyzed three samples of core-shell ...
Crystallization behavior and sintering of cordierite synthesized by an aqueous sol-gel route
(Elsevier Sci Ltd, Oxford, 2012)
The purpose of the research was to investigate crystallization behavior and sintering of cordierite synthesized by a low-price aqueous sol gel route starting from silicic acid and magnesium and aluminum salts. Viscous ...
Lead immobilization by geopolymers based on mechanically activated fly ash
(Elsevier Sci Ltd, Oxford, 2014)
In this paper, the effectiveness of geopolymers based on initial and mechanically activated fly ash in immobilization of lead was investigated. Fly ash (FA) was firstly mechanically and then alkali activated at room ...
Spherical assemblies of titania nanotubes generated through aerosol processing
(Elsevier Sci Ltd, Oxford, 2015)
We report on the possibility to build hierarchically organized three-dimensional (3D) titania spherical particles having high surface-to-volume-ratio, by aerosol processing of nanotubular building blocks. Morphology and ...
Ex-situ sensitization of ordered TiO2 nanotubes with CdS quantum dots
(Elsevier Sci Ltd, Oxford, 2015)
Ordered titania nanotubes (pore diameter approximate to 90 nm and wall thickness approximate to 10 nm) were obtained by the anodization technique and used for the ex-situ deposition of cadmium sulfide quantum dots (CdS ...
Crystallization and sinterability of glass-ceramics in the system La2O3-SrO-B2O3
(Elsevier Sci Ltd, Oxford, 2014)
Glasses with a constant B2O3 and an increasing La2O3 content in the system La2O3-SrO-B2O3 were obtained by the usual melt quenching procedure. The crystallization and sinterability of the glasses were investigated by hot ...
Spark plasma sintering of ZrC-SiC ceramics with LiYO2 additive
(Elsevier Sci Ltd, Oxford, 2013)
Spark plasma sintering (SPS) of ZrC-SiC composite powders in the presence of LiYO2 sintering additive was studied. The starting powders were obtained by a carbothermal reduction (CTR) of natural mineral zircon (ZrSiO4), ...
Preparation and characterization of poly(vinyl butyral) electrospun nanocomposite fibers reinforced with ultrasonically functionalized sepiolite
(Elsevier Sci Ltd, Oxford, 2014)
This study presents an investigation of the effects of the processing conditions on the uniformity, morphology and structure of patterned nanofibrous mats of electrospun poly(vinyl butyral)/sepiolite (PVB/Sep) nanocomposite ...
Polycrystalline (Y0.7Gd0.3)(2)O-3:Eu3+ ceramics fabricated by Spark Plasma Sintering: Densification and microstructure development
(Elsevier Sci Ltd, Oxford, 2014)
Using Spark Plasma Sintering it is possible to produce polycrystalline ceramics of very fine microstructure and good mechanical properties. This work presents the fabrication of such ceramics using Eu3+-doped (Y0.7Gd0.3)(2)O-3 ...
Preparation of low cost alumina nanofibers via electrospinning of aluminium chloride hydroxide/poly (vinyl alcohol) solution
(Elsevier Sci Ltd, Oxford, 2013)
Alumina nanofibers are very suitable materials for use as reinforcement in a great variety of high performance composite materials. Nanosized alumina fibers were prepared from the aluminum chloride hydroxide/poly (vinyl ...