Претраживање
Приказ резултата 11-20 од 22
The influence of light on corrosion of polyaniline coated mild steel / Uticaj osvetljenosti na koroziju mekog čelika sa prevlakom polianilina
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
The influence of light of the mild steel corrosion in 3% NaCl solution with polyaniline coating based on the possibilities that polyaniline can generate photoelectrons, even in the laboratory conditions has been investigated.
Solvatochromism of N-aryl-phenylacetamides / Solvatohromizam N-aril-fenilacetamida
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
Amide derivates are biologically active compounds and they are widely used in all spheres of life. Therefore, it is very important to know their physical-chemical properties. In this work the influence of characteristics ...
Treatment of dispersed iron-bearing raw materials and modeling of the protection systems against air-pollution
(Association of Metallurgical Engineers of Serbia, 2016)
Based on the analysis of the non-standard iron-bearing raw materials treatment process and the results of real composition measurements of the flue gas, the study of hazards by identification of harmful substances that ...
Laboratory testing results of kinetics and processing technology of the polymetallic sulphide concentrate Blagojev Kamen - Serbia
(Association of Metallurgical Engineers of Serbia, 2016)
This work presents the laboratory testing results of kinetics the oxidation process and sample processing of the sulphide polymetallic concentrate Blagojev Kamen. The aim of investigation is recovery of these types of raw ...
The characterization of ternary Zn-Ni-Co alloy coatings electrochemically deposited on steel from sulfate solution / Karakterizacija prevlaka trojnih legura Zn-Ni-Co na čeliku elektrolitički taloženih iz sulfatnog rastvora
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
In this work the electrochemical deposition of ternary Zn-Ni-Co alloy coatings on steel from sulfate, additive-free electrolyte, was investigated. The ratio of metal cations [Co2+]/[Ni2+] in the plating solution was analysed, ...
Development of an effective method for internal pipeline corrosion control in the presence of CO2 / Razvijanje efikasne metode zaštite cevovovoda od unutrašnje korozije u prisustvu CO2
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
This paper reports on progress in developing an effective method for internal pipeline corrosion control in the presence of CO2. The inhibition effect of talloil diethylenetriamine imidazoline (TOFA/DETA imidazoline) on ...
Influence of the Fe(III): Modified clinoptilolite on phosphorus leaching from different soil types / Uticaj Fe(III)- modifikovanog klinoptilolita na izluživanje fosfora iz različitih vrsta zemljišta
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
Influence of the iron(III)-modified clinoptilolite (FeCLI) on phosphorus leaching from two different Norwegian soil types (sand and clay loam soil) was studied using a column system at room temperature. FeCLI was used in ...
Techno-economic analysis of unsaturated polyester production from waste PET / Tehno-ekonomska analiza proizvodnje nezasićenih poliestara iz otpadnog PET-a
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
Unsaturated polyester resins (UPe) were synthesized from maleic anhydride and products of glycolysis, obtained by polyethylene terephthalate (PET) depolymerization with dipropylene glycol (DPG) in the presence of tetrabutyl ...
Selection of lactic acid bacteria strain for simultaneous production of α- and β-galactosidases / Izbor mlečnokiselinske bakterije za istovremenu proizvodnju α- i β-galaktozidaza
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
Galactosidases are group of enzymes gaining increasing attention in recent times due to the fact they catalyse hydrolysis of galatose-containing oligosaccharide, which reduce digestibility of various food and feed products. ...
Anodization of Ti-based materials for biomedical applications: A review
(Association of Metallurgical Engineers of Serbia, 2016)
Commercially pure titanium (cpTi) and titanium alloys are the most commonly used metallic biomaterials. Biomedical requirements for the successful usage of metallic implant materials include their high mechanical strength, ...