Pretraživanje
Prikaz rezultata 1-10 od 108
Electrochemical deposition and corrosion stability of Zn-Co alloy coatings / Elektrohemijsko taloženje i koroziona stabilnost prevlaka Zn-Co legura
(Engineering Society for Corrosion, Belgrade, Serbia, 2006)
The influence of the type of the deposition solution, deposition current density and temperature of deposition solution on the phase structure and corrosion properties of Zn-Co alloys was examined. Alloys were deposited ...
Uticaj gustine izmene za procese taloženja na nastajanje tankog površinskog sloja metala na nesrodnoj podlozi
(Engineering Society for Corrosion, Belgrade, Serbia, 2005)
Electroplating could be defined as a group of procedures in which metal surfaces (sometime nonmetals) transforms, so the surface properties are changed from base materials to the deposited metal. This goal can be achieved ...
Electrochemical deposition and characterization of Zn-Fe alloy coatings / Elektrohemijsko dobijanje i karakterizacija prevlaka legura cink-gvožđe
(Engineering Society for Corrosion, Belgrade, Serbia, 2003)
The influence of the deposition current density and temperature of deposition solution on the phase structure and corrosion properties of Zn-Fe alloys was examined. Alloys were deposited on a rotating disc electrode and ...
Electrochemical and sorption characteristics of metacryloxypropyltrimethoxysilane coatings / Elektrohemijske i sorpcione karakteristike prevlaka metakriloksipropiltrimetoksisilana
(Engineering Society for Corrosion, Belgrade, Serbia, 2008)
The aim of this work was to investigate the influence of deposition parameters (silane solution concentration, deposition time, curing time) on electrochemical and sorption characteristics of metacryloxypropyltrimethoxysilane ...
Investigation of the anodic behaviour of mild steel in different solutions as a base for the selection of suitable electrolyte for the synthesis of electro conducting polymer films / Ispitivanje anodnog ponašanja mekog čelika u različitim rastvorima u cilju izbora elektrolita za elektrohemijsku sintezu filmova elektroprovodnih polimera
(Engineering Society for Corrosion, Belgrade, Serbia, 2002)
In this paper the anodic behavior of mild steel in the different solutions of the organic and the inorganic electrolytes, with the aim to select the electrolyte for the electrochemical synthesis of electro conducting polymer ...
The influence of electrochemically deposited zinc alloys on steel on the protective properties of cathaporetic epoxy coatings / Uticaj elektrohemijski taloženih legura cinka na čeliku na zaštitna svojstva epoksidne kataforetske prevlake
(Engineering Society for Corrosion, Belgrade, Serbia, 2005)
Prior to cathaporetic epoxy coating deposition steel surface was modified by chemical deposition of hot dip galvanized steel and by electrochemical deposition of zinc alloys with iron group of elements (Ni, Co and Fe). The ...
Korozija metala - šta je to?
(Engineering Society for Corrosion, Belgrade, Serbia, 2004)
Korozija materijala je opšte poznat i prihvaćen izraz, ali da li se baš tačno zna šta je korozija? Pod pojmom korozija materijala se podrazumeva svako neželjeno razaranje materijala kao posledice delovanja spoljne sredine. ...
Characterization of electrochemically synthesized pani on graphite electrode for potential use in electrochemical power sources / Elektrohemijska sinteza i karakterizacija elektrode od polianilina za potencijalnu upotrebu u elektrohemijskim izvorima energije
(Engineering Society for Corrosion, Belgrade, Serbia, 2009)
Polyaniline (PANI) on graphite electrode was synthesized electrochemically under galvanostatic condition at current density of 2.0 mA cm-2 from aqueous solution of 1.0 moldm-3 HCl and 0.25 mol dm-3 aniline monomer. ...
Nanostructured intrinsically conducting polymers formed by electrochemical synthesis / Nanostruktuirani elektroprovodni polimeri dobijeni elektrohemijskom sintezom
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
Due to unique properties of intrinsically conducting polymers (ICP) such as: electrical conductivity, reversible electrochemistry, optical activity, biocompatibility, environmental and corrosion stability, they still ...
The influence of impurities and theirs removal in the electrochemical measurements / Uticaj nečistoća i njihovo uklanjanje u elektrohemijskim merenjima
(Engineering Society for Corrosion, Belgrade, Serbia, 2002)
In this paper the different kind of impurities which can have the influences on electrochemical (corrosion) measurements in the electrolytic solutions, as well as the methods of theirs removal, has been given.