Претраживање
Приказ резултата 21-30 од 108
Corrosion behavior of high- and low-chromium steel grinding balls in chloride solution / Koroziono ponašanje čeličnih kuglica za mlevenje sa visokim i niskim sadržajem hroma u rastvoru hlorida
(Inženjersko društvo za koroziju, 2024)
The corrosion behaviour of three types of alloys (two low-alloy carbon steel and one stainless iron with ~15 wt.% Cr), in a solution which simulates seawater (3% NaCl solution, pH 8.1) was tested. Tested samples are used ...
Characterization of NiAl layers deposited by atmospheric plasma spray (APS) / Karakterizacija NiAl slojeva deponovanih atmosferskim plazma sprejom (APS)
(Engineering Society for Corrosion, Belgrade, Serbia, 2020)
In this paper analyzed were the mechanical properties and microstructure of the Ni30Al coating layers deposited using atmospheric plasma spray (APS). For deposition of the coating applied was a composite Ni30wt.% Al powder, ...
Correct determination of the hydrogen evolution reaction parameters at Ni foam electrode modified by electrodeposited Ni-Sn alloy layer / Procedura korektnog određivanja parametara reakcije izdvajanja vodonika na elektrodi od Ni pene modifikovane elektrohemijski istaloženom Ni-Sn legurom
(Inženjersko društvo za koroziju, 2024)
The example of the procedure for the correct determination of the parameters of hydrogen evolution reaction (HER), the exchange current density (jo) and relaxation time (τo) for intermediate (adsorbed hydrogen, Hads) ...
Immobilization of heavy metal ions Zn2+, Ni2+, Pb2+ and Cu2+ in the structure of cement-based materials / Imobilizacija teških metalnih jona Zn2+, Ni2+, Pb2+ i Cu2+ u strukturi materijala na bazi cementa
(Engineering Society for Corrosion, Belgrade, Serbia, 2020)
Natural zeolite and bentonite were utilized as mineral additives in the mix-design of environmentally safe cement-based building materials. The adsorptive abilities of these two clayey raw materials, i.e. their affinity ...
Thermal treatment of composite wastes for energy recovery / Termički tretman otpadnih kompozitnih materijala u cilju dobijanja energije
(Engineering Society for Corrosion, Belgrade, Serbia, 2020)
The expression waste-to-energy technologies is increasingly being used regarding waste reduction and utilization. Waste-to-energy technologies are procedures used to generate different forms of energy starting from a waste ...
The influence of impurities and theirs removal in the electrochemical measurements / Uticaj nečistoća i njihovo uklanjanje u elektrohemijskim merenjima
(Engineering Society for Corrosion, Belgrade, Serbia, 2002)
In this paper the different kind of impurities which can have the influences on electrochemical (corrosion) measurements in the electrolytic solutions, as well as the methods of theirs removal, has been given.
Electrochemical deposition and characterization of Zn-Fe alloy coatings / Elektrohemijsko dobijanje i karakterizacija prevlaka legura cink-gvožđe
(Engineering Society for Corrosion, Belgrade, Serbia, 2003)
The influence of the deposition current density and temperature of deposition solution on the phase structure and corrosion properties of Zn-Fe alloys was examined. Alloys were deposited on a rotating disc electrode and ...
Uticaj gustine izmene za procese taloženja na nastajanje tankog površinskog sloja metala na nesrodnoj podlozi
(Engineering Society for Corrosion, Belgrade, Serbia, 2005)
Electroplating could be defined as a group of procedures in which metal surfaces (sometime nonmetals) transforms, so the surface properties are changed from base materials to the deposited metal. This goal can be achieved ...
Epoxy coatings electrodeposited on steel electrochemically modified by Zn-Co alloys / Epoksidne kataforetske prevlake na čeliku modifikovanom Zn-Co legurama
(Engineering Society for Corrosion, Belgrade, Serbia, 2003)
The corrosion behavior of epoxy coatings electrodeposited on steel and steel modified by Zn-Co alloys deposited from chloride and sulphate baths were investigated during exposure to 3 % NaCl. The electrochemical impedance ...
Hydroxyapatite coatings on TiO2 nanotubes / Prevlake hidroksiapatita na nanotubama oksida titana
(Engineering Society for Corrosion, Belgrade, Serbia, 2010)
The aim of this work was to obtain nanotubular TiO2 layer by anodization of titanium substrate, and to prepare hydroxyapatite (HAP) coatings by electrophoretic deposition over nanotubular TiO2 layer. The presence of fluoride ...