Претраживање
Приказ резултата 401-410 од 454
Effect of different fermentation parameters on L-lactic acid production from liquid distillery stillage
(Elsevier Sci Ltd, Oxford, 2012)
Expansion of lactic acid applications, predominantly for the preparation of biodegradable polymers increased the research interest for new, economically favourable production processes. Liquid stillage from bioethanol ...
The effect of agitation intensity on alkali-catalyzed methanolysis of sunflower oil
(Elsevier, 2007)
The sunflower oil methanolysis was studied in a stirred reactor at different agitation speeds. The measurements of drop size, drop size distribution and the conversion degree demonstrate the effects of the agitation speed ...
Shape and aspect ratio analysis of anisotropic magnetic nanochains based on TEM micrographs
(Ceramics International, 2018)
Due to advances in electron microscopy and to the development of novel nanoparticle structures with different morphologies and the dependence of physical properties on the nanoparticle morphology, there is a need for a ...
Hydrothermal synthesis, morphology, magnetic properties and self-assembly of hierarchical α-Fe2O3 (hematite) mushroom-, cube- and sphere-like superstructures
(Applied Surface Science, 2018)
We report on glycine-free and glycine-assisted hydrothermal synthesis of microsized superstructures composed of self-assembled hematite nanoparticles. An X-ray powder diffraction measurements of the samples confirm good ...
How to improve the economy of bioethanol production in Serbia
(Pergamon-Elsevier Science Ltd, Oxford, 2012)
Bioethanol accounts for the majority of biofuel use worldwide, either as a fuel or a gasoline enhancer. In Serbia, the industrial production of bioethanol still relies on conventional feedstocks containing starch and sugar ...
Analysis and experimental demonstration of forced periodic operation of an adiabatic stirred tank reactor: Simultaneous modulation of inlet concentration and total flow-rate
(Chemical Engineering Journal, 2021)
It is well known, that forced periodic operation possesses the potential for process improvements. Nevertheless, only a small number of applications is reported, due to complex realization, limited predictability and high ...
Specificity of the UPD of H to the structure of highly dispersed Pt on carbon support
(Pergamon-Elsevier Science Ltd, Oxford, 2007)
Home-made carbon cryogel synthesized by sol-gel polycondensation and freeze-drying is used as support for preparation of highly dispersed Pt catalyst that is made by a modified polyol synthesis method in an ethylene glycol ...
Underpotential deposition of hydrogen on MoPt 4 intermetallic phase in acid solution: Temperature dependence
(Elsevier Ltd, 2004)
Potentiodynamic studies of the underpotential deposition of hydrogen (H upd ) on MoPt 4 electrode in 0.5 mol dm -3 HClO 4 aqueous solution in the range of temperature from 275 to 312 K are made and thermodynamic state ...
Initial microstructure effect on the mechanical properties of Ti-6Al-4V ELI alloy processed by high-pressure torsion
(Elsevier Science Sa, Lausanne, 2018)
effect of initial microstructure on the mechanical properties and fracture mode of the Ti-6Al-4V ELI alloy subjected to the high-pressure torsion (HPT) processing at room temperature and 500 degrees C was investigated. In ...
The influence of the polyaniline initial oxidation states on the corrosion of steel with composite coatings
(Elsevier Science Sa, Lausanne, 2018)
The chemically synthesized polyaniline in the powdered form by the procedure recommended by IUPAC is reprotonated using sulfamic, citric, succinic and acetic acid. The UV-vis spectroscopy is applied to estimate doping ...