Pretraživanje
Prikaz rezultata 1-10 od 59
Corrosion properties of an aluminium alloy 7000 series after a new two step precipitation hardening / Otpornost prema koroziji aluminijumske legure serije 7000 posle novog dvostepenog termičkog taloženja
(Engineering Society for Corrosion, Belgrade, Serbia, 2014)
Corrosion properties of an aluminium alloy 7000 series were investigated by different electrochemical methods. The alloy was subjected to the one-step and to a new two-step precipitation hardening. Polarization measurements ...
Laser cleaning of textile artifacts with metal threads: Process parameter optimization / Lasersko čišćenje tekstilnih eksponata sa korodiranim metalnim nitima - optimzacije parametara procesa
(Military Technical Institute, Belgrade, 2014)
This paper presents the results of the laser cleaning effects on textile samples with corroded metallic threads. In many museum collections, there are textile exhibits like uniforms, national costumes, flags and home ...
Oxidation and erosion behaviour of SiC-HfC multilayered composite
(Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad, 2014)
The fabrication of SiC-HfC ceramic composite via self-propagating high-temperature synthesis and simultaneous consolidation was investigated. Dense composite consisting of alternating layers of SiC and HfC was obtained by ...
Modified tannins for alkyd based anticorrosive coatings / Primena modifikovanih tanina u antikorozionim alkidnim premazima
(Engineering Society for Corrosion, Belgrade, Serbia, 2019)
The study of the synthesis of anticorrosive inhibitors, based on chemically modified tannins, and their use in alkyd based coatings to improve anticorrosive properties is presented in this work. Two methods of tannin ...
Corrosion influence on surface appearance and microstructure of compo cast ZA27/SiCp composites in sodium chloride solution
(Elsevier Science Bv, Amsterdam, 2016)
The influence of corrosion on the surface appearance and microstructure of particulate ZA27/SiCp composites was examined after 30 d immersion in a sodium chloride solution with the access of atmospheric oxygen. The composites ...
Savremeni čelici - dvojnikovanjem izazvana plastičnost
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, 2014)
A significant increase in the research activity dedicated to high manganese TWIP steels has occurred during the past few years, motivated by the breakthrough combination of strength and ductility possessed by these alloys. ...
Economizer water-wall damages initiated by feedwater impurities
(Savez hemijskih inženjera, Beograd, 2014)
The main causes of efficiency loss in thermal power plants are boiler tube failures that diminish unit reliability and availability, and raise the cost of the electric energy. For that reason, the regular examination of ...
The influence of light on corrosion of polyaniline coated mild steel / Uticaj osvetljenosti na koroziju mekog čelika sa prevlakom polianilina
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
The influence of light of the mild steel corrosion in 3% NaCl solution with polyaniline coating based on the possibilities that polyaniline can generate photoelectrons, even in the laboratory conditions has been investigated.
The importance of using hydrogen evolution inhibitor during the Zn and Zn-Mn electrodeposition from ethaline
(Srpsko hemijsko društvo, Beograd, 2019)
Cyclic voltammetry was used for the characterization of zinc electro-deposition on steel from ethaline deep eutectic solution (1:2 choline chloride:ethylene glycol). The influence of 4-hydroxy-benzaldehyde (HBA) as an ...
Ternary Zn-Ni-Co alloy: anomalous codeposition and corrosion stability
(Srpsko hemijsko društvo, Beograd, 2015)
Electrochemically deposited Zn-Ni-Co alloys under various deposition conditions were investigated using atomic absorption spectroscopy for the determination of the chemical composition, atomic force microscopy for surface ...