Претраживање
Приказ резултата 1-10 од 27
Effect of temperature on the electrodeposition of disperse copper deposits / Uticaj temperature na elektrohemijsko taloženje disperznih taloga bakra
(Serbian Chemical Society, 2007)
The effect of temperature on the electrodeposition of copper at overpotentials belonging to the plateau of the limiting diffusion current density and higher was examined by the determination of the average current efficiency ...
The importance of using hydrogen evolution inhibitor during the Zn and Zn-Mn electrodeposition from ethaline
(Srpsko hemijsko društvo, Beograd, 2019)
Cyclic voltammetry was used for the characterization of zinc electro-deposition on steel from ethaline deep eutectic solution (1:2 choline chloride:ethylene glycol). The influence of 4-hydroxy-benzaldehyde (HBA) as an ...
Ternary Zn-Ni-Co alloy: anomalous codeposition and corrosion stability
(Srpsko hemijsko društvo, Beograd, 2015)
Electrochemically deposited Zn-Ni-Co alloys under various deposition conditions were investigated using atomic absorption spectroscopy for the determination of the chemical composition, atomic force microscopy for surface ...
Manganese electrodeposition from urea-rich electrolyte
(Soc Chemists Technologists Madeconia, Skopje, 2015)
Pure manganese coatings were prepared on the steel (AISI 4340) electrode by a non-conventional electrodeposition method, in the presence of 8 mol dm(-3) of urea as a plating additive. The influence of urea on the ...
Estimation of the exchange current density and comparative analysis of morphology of electrochemically produced lead and zinc deposits
(Serbian Chemical Society, 2017)
The processes of lead and zinc electrodeposition from the very dilute electrolytes were compared by the analysis of polarization characteristics and by the scanning electron microscopic (SEM) analysis of the morphology of ...
Electrochemically deposited Ni+WC composite coatings obtained under constant and pulsating current regimes
(Netherlands : Kluwer Academic Publishers, 2004)
A series of Ni+WC composite coatings were obtained by electrodeposition on a rotating disc electrode (RDE)from a commercially available Watts bath containing additives for brightness and smoothing and insoluble WCparticles, ...
Comparative analysis of the polarization and morphological characteristics of electrochemically produced powder forms of the intermediate metals
(Macedonian Journal of Chemistry and Chemical Engineering, 2014)
The polarization and morphological characteristics of powder forms of the group of the intermediate metals were examined by the analysis of silver and copper electrodeposition processes at high overpotentials. The pine-like ...
Effect of the orientation of the initially formed grains on the final morphology of electrodeposited lead
(Serbian Chemical Society, 2014)
The processes of Pb electrodeposition under diffusion control were examined by scanning electron microscopy (SEM) of the formed crystals. The orientation of grains of hexagonal shape formed in the initial stage of ...
Influence of the type of electrolyte on the morphological and crystallographic characteristics of lead powder particles / Uticaj tipa elektrolita na morfološke i kristalografske karakteristike praškastih čestica olova
(Serbian Chemical Society, 2013)
Lead electrodeposition processes from basic (nitrate) and complex (acetate) electrolytes were mutually compared by scanning electron microscopy and X-ray diffraction investigation of the produced powder particles. The shape ...
Determination of the absolute hardness of electrolytically produced copper coatings by application of the Chicot–Lesage composite hardness model / ОДРЕЂИВАЊЕ АПСОЛУТНЕ ТВРДОЋЕ ЕЛЕКТРОЛИТИЧКИ ДОБИЈЕНИХ ПРЕВЛАКА БАКРА ПРИМЕНОМ CHICOT–LESAGE КОМПОЗИТНОГ МОДЕЛА ТВРДОЋЕ
(Serbian Chemical Society, 2022)
In this study, a novel procedure, based on application of the Chicot––Lesage (C–L) composite hardness model, was proposed for the determination of an absolute hardness of electrolytically produced copper coatings. The Cu ...