Pretraživanje
Prikaz rezultata 131-140 od 168
Effect of plasma hardfacing and carbides presence on the occurrence of cracks and microcracks
(Society for Structural Integrity and Life, Institute for Material Testing, 2018)
Presented is the effect of plasma hardfacing (or just hardfacing) and carbides presence on the occurrence of cracks and microcracks in the welded layer. The reasons behind this phenomenon are analysed and explained. In ...
Mechanical and structural features of Nb coating layers deposited on steel substrates in a vacuum chamber / Mehaničke i strukturne karakteristike slojeva prevlake Nb deponovane u vakuumu
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
In this paper analyzed was the influence of implementation of inert Ar gas and a mixture of inert plasma Ar / He gases in a vacuum chamber on the deposition of reactive niobium (Nb) powder. The aim of this paper was to ...
Optimization of galacto-oligosacharides synthesis using response surface methodology / Optimizacija sinteze galakto-oligosaharida pomoću metoda odzivnih površina
(Institute for Food Technology, Novi Sad, 2017)
Galacto-oligosaccharides (GOS) are important lactose-derived compounds, considered to be a prebiotics, based on abundant scientific evidence about their unique physical properties and physiological effects. This consequently ...
Prednosti zavarivanja trenjem sa mešanjem u odnosu na elektrolučno zavarivanje - zaštita zdravlja i životne sredine i bezbednost na radu / Advantages of friction stir welding over arc welding with respect to health and environmental protection and work safety
(Society for Structural Integrity and Life (DIVK), 2015)
U savremenoj industrijskoj proizvodnji, svaki proizvodni proces treba da bude ispitan u pogledu uticaja na životnu sredinu. Za svaku kompaniju koja investira u novi proces je od značaja pažljivo razmatranje HSE (Health, ...
Effect of corn straw pretreatment on efficiency of biogas production process: Computer simulation
(Institut za istrazivanja i projektovanja u privredi, 2020)
Anaerobic digestion is a natural process of organic material degradation by different kinds of microorganisms in the absence of oxygen. This process is used for industrial purpose to manage waste streams or to produce ...
Micromechanical modelling of ductile fracture - local approach
(Savez inženjera metalurgije Srbije, Beograd, 2019)
Micromechanical modelling of ductile fracture by using the local approach has been presented as the review of previously obtained results for welded joints made of low alloyed high strength steel. Experimental work was ...
Characterisation of the nanotubular oxide layer formed on the ultrafine-grained titanium
(Savez inženjera metalurgije Srbije, Beograd, 2018)
Commercially pure titanium (cpTi) and titanium alloys are metallic implant materials usually used in dentistry and orthopaedics. In order to improve implant properties, Ti-based materials may be surface modified by different ...
Influence of defects on limit loads and integrity of the pipeline at hydropower plant 'Pirot'
(Society for Structural Integrity and Life, Institute for Material Testing, 2020)
Topic of this work is the integrity assessment of the pipeline section from hydropower plant Pirot. Crack-like defect size, maximum depth, is determined based on non-destructive evaluation - the largest crack depth is taken ...
Influence of encastering on thin-walled cantilever beams with u and z profiles on the magnitude of equivalent stress and deformation
(Society for Structural Integrity and Life, Institute for Material Testing, 2019)
The purpose of this work is to present analytical and numerical determination of equivalent stress and deformation of open section thin-walled U and Z cantilever beams loaded with torsion. This work can be divided into two ...
Optimizing the thermal gradient and the pulling speed in a thermoplastic pultrusion process of pet/e glass fibers using finite element method
(Savez inženjera metalurgije Srbije, Beograd, 2018)
A thermoplastic pultrusion process was examined using commercial fiber roving of PET/E glass, to determine the optimum pulling speed and optimal zonal temperatures. Finite element analysis predicted heat transfer through ...