Претраживање
Приказ резултата 11-20 од 41
Electrochemical synthesis and characterization of polyaniline thin film and polyaniline powder
(Elsevier Science Sa, Lausanne, 2011)
The polyaniline thin film electrode and powder have been synthesized on graphite electrodes from 0.5 M hydrochloric acid solution under galvanostatic conditions. The water insoluble and acetone soluble polyaniline mass ...
The effect of resin concentration and electrodeposition bath temperature on the corrosion behaviour of polymer-coated steel
(Progress in Organic Coatings, 1990)
A.C. impedance measurements carried out on epoxy-resin electrocoated steels have been used to determine the pore resistance, capacitance and relative permittivity of the organic films. The time dependence of these ...
Adhesion characteristics and corrosion stability of epoxy coatings electrodeposited on phosphated hot-dip galvanized steel
(Elsevier Science Sa, Lausanne, 2008)
The influence of hot-dip galvanized steel (HDG) surface pretreatment with phosphate coatings on the corrosion stability and adhesion characteristics of epoxy coatings electrodeposited on HDG steel was investigated. Phosphate ...
Electrochemical polymerization and initial corrosion properties of polyaniline-benzoate film on aluminum
(Elsevier Science Sa, Lausanne, 2009)
Electrochemical synthesis of polyaniline (PANI) on aluminum electrode from aqueous Solution Of 0.25 mol dm(-3) aniline and 0.2 mol dm(-3) sodium benzoate has been investigated under potentiodynamic and galvanostatic ...
Kinetics of the mild steel corrosion protection by polypyrrole-oxalate coating in sulfuric acid solution
(Elsevier Science Sa, Lausanne, 2006)
Kinetics of the mild steel corrosion protection in 0.1 mol dm(-3) H2SO4 by polypyrrole coatings have been investigated by the means of electrochemical impedance spectroscopy (EIS), cyclic voltammetry, polarization measurements ...
The influence of different components on interpenetrating polymer network's (IPN's) characteristics as automotive top coats
(Elsevier Science Sa, Lausanne, 2010)
The aim of this study was to investigate the influence of different components of interpenetrating polymer networks (IPNs) on their behavior in dual curing automotive applications. Dual curing is one of possible ways to ...
Synthesis and characterization of interpenetrating polymer networks with hyperbranched polymers through thermal-UV dual curing
(Elsevier Science Sa, Lausanne, 2008)
The aim of this study was to investigate the possibility of using acrylated hyperbranched polyesters (HBP) as UV curable component in dual curing automotive applications. Dual curing is one of possible ways to obtain fast ...
Methacryloxypropyltrimethoxysilane films on aluminium: Electrochemical characteristics, adhesion and morphology
(Elsevier Science Sa, Lausanne, 2009)
The electrochemical characteristics, adhesion and morphology of methacryloxypropyltrimethoxysilane (MAPT) films on aluminium were investigated during exposure to 3 wt.% NaCl. The MAPT films were deposited on aluminium ...
Corrosion studies on electrochemically deposited PANI and PANI/epoxy coatings on mild steel in acid sulfate solution
(Elsevier Science Sa, Lausanne, 2005)
The corrosion behavior of mild steel and mild steel covered by electrochemically deposited (a) polyaniline (PANI) film, (b) epoxy coating
and (c) PANI/epoxy coating system in 0.1 M sulfuric acid solution were investigated ...
The influence of steel surface modification by electrodeposited Zn-Fe alloys on the protective behaviour of an epoxy coating
(Elsevier Science Sa, Lausanne, 2003)
The electrochemical and transport properties of epoxy coatings electrodeposited on steel and steel modified by Zn-Fe alloys were investigated during exposure to 3% NaCl. The Zn-Fe alloys were deposited on steel surface ...